FiveseveNForum.com

I'm unaware of them making any changes to the barrel threads.?

This is sold.

blueorison wrote: ↑

09 May 2022, 13:41

Buffman wrote: ↑

18 Jan 2022, 21:51

Would you be willing to get me 2 boxes and I will reimburse you?

We can get ammo shipped to us from overseas?

It would help for me to realize his screen name likely means he's from over in Europe

Can I post yet?

so I can use SPP for my 5.7 loads? Is there a "don't use them above" load? Or are they in theory good for all loads? I'm running low on SRP

I hope to have one when they are released.

62gr is max without going to a 1:7, but it needs to be a lead core 62gr. Most of us use 55gr FMJ

It is a longer bullet than most 40gr, so it should be fine. I will have to test accuracy at some point

Howdy! Nice to have you here

Shouldn't be any reason you couldn't. I'm using Tac for my load

OE Feedlips will blow apart too

I'm going to try these in .223 this summer

JohnG wrote: ↑

22 Feb 2022, 10:29

Gents...thanks for following up! So Lyman is working for you Buffman? Jay...have you seen/heard anything with regard to availability? Thank you guys

I'm still using them

Likely he's a troll

The 55gr Sierra Game Kings had magical properties, and I've yet to find another off the shelf 55gr FMJ to have a thick jacket like it. SB193 is now 62gr and no one has identified the bullet.
They will tumble in tissue. The lack of velocity isn't going to help with wounding

Would you be willing to get me 2 boxes and I will reimburse you?

Very Sexy

The DBX from what I can tell won't need the coating as it's gas driven. You''re better off just leaving whatever coating is intact vs wasting time trying to strip it off.

Pretty much any load except subsonics through a can on the FSN is going to cause a bit of blowback

From Design Machine this is their P90/PS90 low pro mount for the Trijicon MRO. This replaces your factory ringsight, or 1913 rail on your PS90/P90. Mounting screws for the MRO and mount included. $110 Shipped. Paypal, Venmo, CashAPP https://live.staticflickr.com/65535/51530642935_f001568453.jpg IMG_...

So $100/box?

Are they both 1:9? I'll take one

I have not had an issue with the CMMG beating up brass.

I like my Lyman 5.7 dies

shopsmart wrote: ↑

07 Jul 2021, 05:47

Doing about 1000 fps. Formula is from here and works well. Have discussed with you before. I think on FB.

That's right. I was running about 3gr and only going 750-800, but I think TB is not temperature stable so the 30F temps may have been impacting it a bit.

What velocity are you getting out of those subs with 2.5gr of TB?

What velocity are you getting out of those subs with 2.5gr of TB?

Are you working with a threaded barrel? Send me a PM

Are you working with a threaded barrel? Send me a PM

Jseriojr wrote: ↑

24 Jun 2021, 22:24

Thx guys. Hey buffman, whats the gr you are using? Lyman 50th only has super info.

Pistol or SBR?

I use accurate #7 and 55gr FMJ

Yep launched at SHOT 2020. I had multiple contacts promise up and down Speer would send samples by May 2020. That came and went, and my contacts were told by Speer that it was being delayed. Around August/Sept multiple reports of the ammo showing up at dealers. Can't get a confirmation from Speer th...

I use 55gr for subs only

Also note that all 2018 and newer SS198LF have a cannelure on the bullet. Not sure why unless they are using it for crimping, but it's well below the neck.

I spent the cost of a used car on 5.7 ammo to bring you all a true review of this DBX in 5.7

https://www.youtube.com/watch?v=x6P9BzwPKts&t=1s

The DBX is the only 5.7 gun so far that has literally no shoulder movement.

would be interested in seeing this brass you picked up. Sounds beat.

But my sample only likes the pro mags

Not much action here

what is the Lot #?

still here

TL: DR This is the performance we should expect out of SS197SR, but yet they keep dialing it back. Fiocchi should really start mechanically crimping rounds. P90 feeding OK, PS90 not so. Could be gun, or could be the feed angle and bullet profile. Min velocity gain from 10" to 16". Consistent perform...

post a picture of them. What velocity are you getting?

Review is done. If you want the lowest possible RDS mounting, then this cover and RDS mount are your Huckleberry. Some may not like the slide cover, so it may not be everyone's cup of tea. No issues at all after 1000 rds..

https://youtu.be/vaWk8vc3aYM

Sinterfire bullet, that EA has been producing for some time. This is the first that this load has been available in the US. The results will surprise you for it's performance..

https://youtu.be/ib0bffKJ9yI
https://youtu.be/ib0bffKJ9yI[/youtube]

It's in all 5.7 platforms

They require the lacquer..

Ran this little custom load from EA through the ringer. It did quite well..

https://youtu.be/LE-a7sflPjQ

We won't know until reloaders start working with it.

I check in every so often

^ To my knowledge no.

i'm here

the coating helps the round "stick" in the chamber slightly longer to allow the blowback action to do it's job safely

Yes. the SBR wasn't available for me to review at the time.

The 8" version I reviewed had velocities very close to P90 SBR.

Top three are the USG model. The bottom is the MK2 which is the newest model

links to these blog posts

^ Yep

one of theirs had a slight crack in the neck yes.

Wonder what dies Triple R uses (see subsonic far right)
https://scontent-ort2-2.xx.fbcdn.net/v/ ... e=5BD32F72

Got pictures? Do you have EA's case gage? I believe that's normal from another picture I've seen of people using 1x brass.

This is the new gun that's been hidden behind NDAs..
https://youtu.be/QH3y1xC0ugM

panzermk2 wrote: ↑

14 Jul 2018, 11:06

PainKillaX wrote: ↑

13 Jul 2018, 15:14

Buffman wrote: ↑

12 Jul 2018, 16:51

Wait a couple weeks

Taking a page out of the LaRue play book I see.

LOL He has to, and not to brag to much but Buffman has one to review because I asked them to get him one.

Yep, owe that one to Jay.

PainKillaX wrote: ↑

13 Jul 2018, 15:14

Buffman wrote: ↑

12 Jul 2018, 16:51

Wait a couple weeks

Taking a page out of the LaRue play book I see.

Gotta play by the rules sometimes

Wait a couple weeks

Howdy

Velocity, Tons of Penetration!! I'm sure EA will further tweak this design
https://youtu.be/ocmwzC9o728

5.3" and 10.3" barrel used in test

https://www.youtube.com/watch?v=8yZfMjMmMY0[/YouTube]

no Sir...
What they are hinting at, do not know yet. Just parts to switch Mp7 over to 5.7? A semi auto Mp7 in 5.7 for US?
https://www.instagram.com/gsg9.us/

GSG9 ( a manufacturer in AZ) is making a Mp7 in 5.7

I have a feeling this would out penetrate T6B, but I'm liking the slightly less penetration from the T6B over this. Would like to see the T6B return to 28gr and bump the speed back up.

They work good if you have a good range behind where you're shooting. Pistol range with close (under 15 yd) back stop, no workie..

Someone needs to look at having the DNS record updated. I wonder if that's why it's so dead around here. I can get here and resolve to: 99.172.28.101 but many can't even get a ping to tell resolve IP

^^ hard to say. Shot placement with any round is key. My take away from it, is that SS197SR inside his body still destroyed quite a bit of stuff. Had that been a "glorified" 22 magnum, would the tissue destruction been the same?

still have people who can't reach it for some time.

Man Kave is your best bet. He's on the other forum.

but the naysayers still claim that's fake news

You could see if EWK would make you a one off? http://www.ewkarms.com/zen8/

so the reverse of the adapters for the FSN to use standard 22 LR.

Not easy to come by

So can you .22lr do this? :O

I have the Dev's on hand, just need to get $$$ for a gel block for testing. IMO the best penetrating to wounding potential ammo is T6b/Dev. SS190 may out penetrate it on PE style hard armor, but it is limited soft tissue penetration.

^ Yes. It is about 200 fps slower..

Chrono still only shows S4m around 200 fps faster than SS198

^ He lives!

Welcome Aboard

Eric, IMO the two good subsonic loads I've used are EA's and R&R Weapon Systems. Although I haven't tested the others

Without a civilian 4.6 gun in the US, tests are going to be hard to come by.. I can confirm smaller 4.5 rounds (17HMR) from a full length rifle barrel can penetrate soft armor. The question would be, with the restricted 4.6 ammo, how would it do.

Without a civilian 4.6 gun in the US, tests are going to be hard to come by.. I can confirm smaller 4.5 rounds (17HMR) from a full length rifle barrel can penetrate soft armor. The question would be, with the restricted 4.6 ammo, how would it do.

it is 2-5% slower than SS197SR

Depends on the load.. AE TMJ loses about 100 fps

bvtbee66 wrote: ↑

01 Aug 2017, 00:53

Awesome Buffman By the way, any information about why "EA" is only now selling this *37gr DevestaTOR to the general civilian populace ?

performance gap between T6B and current Dev has closed to the point where they are very similar, so EA opened up the sales..

Working on the ballistic testing.

I had been in contact with the CEO and last I checked it was on hold

Nice!

^^ I got one Just didn't have it on in the picture.

AE TMJ and SS197SR are both loaded by Fiocchi. Quality can be iffy on both. I've had good luck with AE TMJ, albeit it's slow as fudge..

^ 1000 fps give or take.

^ That will do it no problem in most cases. I'm trying to figure out what will do it subsonic

Still finding out which 55gr FMJ will do this like the factory SB193 does. I tried some generic FMj and it was a no go.

I've switched over to flickr. I can hardly use PB because of all the ads even with Ad Blocker