Reticule Enhancement Module T3 (sales)

Manufacturer of the Reticle Enhancement Module 3 for the PS90, Illuminates the White Ring Sight,The Black Ring Sight and the Green Dot Fiber Optic Ring Sight.
"Peace Through Strength" merchandise

Moderator: M1P90

Post Reply
User avatar
M1P90
Forum Supporter
Posts: 324
Joined: 20 Aug 2008, 08:19
Location: Socialist Republic of Mass.
Contact:

Reticule Enhancement Module T3 (sales)

Post by M1P90 » 07 Nov 2008, 13:33

REM T3
P90/PS90 White Ring Sight Fix

The price is $39.95 shipped.

For all of you that want a usable Sight and don’t want to spend $400.00 to $600.00 to replace the White Ring Sight - THIS IS YOUR ANSWER!

The Reticule Enhancement Module T Bar 3 (REM T3) fixes the problem that is inherent in the White Ghost Ring Sight of the P90/PS90 Weapons System. We all know in certain low light conditions or when aiming at bright or light colored backgrounds, the Ring Sight looses its sight picture. When that happens just turn on the REM T3 and you will get a sharp T bar sight picture.

The REM T3 Illuminates the T bar of the Ring Sight via a colored LED that sits in the rear light collector well. The LED color only comes in RED. The LED housing is made of a hard plastic that is sized to create a tight friction fit. There is no need to use tape or glue. Just push it down into the light collector well and it stays put. The LED housing was designed to sit low in the well so it will not interfere with the FOV.

The REM T3 has 11 illumination settings so the T bar can be seen outdoors in daylight on its brightest setting (even against snow or white backgrounds) or in total darkness on its lowest setting. The REM T3 does not interfere with the Tritium illumination of the Ring Sight.

The REM T3 fits in the sling well just under the Ring Sight. It is ambidextrous so it can be mounted on the left or right side of the rifle.

The REM T3 uses one CR2032 3 volt battery (included.) The battery life is 168 to 390 hours of continuous use depending on the LED color.

The REM T3 has a 1 YEAR Warranty. I will replace it if it fails due to a manufacturing problem. (I will have to examine it first to make sure there wasn't some other factor that caused the failure). You just pay for the shipping ($5.00). If after 1 year a manufacturing problem should occur... contact me and I will see what I can do for you.

The REM T3 comes with a 30 day money back guarantee. If you are dissatisfied with it, please send it back to me and I will give you a full refund (minus shipping costs.)

The price is $39.95 shipped.

I take checks, Money Orders or I can do Pay Pal. My Pay Pal acct. is [email protected]

Go to http://www.m1bullpup.com" onclick="window.open(this.href);return false; to pay by Visa, Mastercard or Discover

PM me or e-mail me at [email protected]
Include your full name and address and LED color choice so I can put you on the order list.

REM T3
Image

Packaging
Image

Image

Normal View out window
Image

With REM T3 turned on
Image
Image

PEACE THROUGH STRENGTH
http://www.M1bullpup.com" onclick="window.open(this.href);return false;

User avatar
M1P90
Forum Supporter
Posts: 324
Joined: 20 Aug 2008, 08:19
Location: Socialist Republic of Mass.
Contact:

Re: Reticule Enhancement Module T3 (sales)

Post by M1P90 » 07 Nov 2008, 14:11

NORMAL RING SIGHT VIEW IN LOW LIGHT ROOM
Image

RED LED ON SETTING 1 IN LOW LIGHT ROOM
Image

Image

Image

Image

Image
Image

PEACE THROUGH STRENGTH
http://www.M1bullpup.com" onclick="window.open(this.href);return false;

User avatar
M1P90
Forum Supporter
Posts: 324
Joined: 20 Aug 2008, 08:19
Location: Socialist Republic of Mass.
Contact:

Re: Reticule Enhancement Module T3 (sales)

Post by M1P90 » 07 Nov 2008, 14:19

REM T3 Instruction Manual

Thank you for purchasing this upgrade to your PS90 Ring Sight. The REM T3 was designed to maximize your shooting pleasure by fixing the deficiencies of the Ring Sight.

Image

Installation
1) Place side A (Rheostat Housing) on one side of the Sling Well and side B on the other side. Tighten the mounting screws until both sides are secure. Use the Allen wrench that is supplied for this procedure. (DO NOT OVER-TIGHTEN to prevent damage to the screw pins on side A.) You can use BLUE thread locker if you like but it is not necessary.
2) Look inside the well area to make sure the area is free of excess glue. If you have glue protrusions cut them out with an exacto knife/razor blade.
3) Press the LED housing ( C ) all the way down into the rear light collector well. It will be a very tight friction fit. (No need to use tape or glue)

Image

You can now turn on and use the REM T3.

To remove the LED housing from the Ring Sight, use a flathead screwdriver to pry the housing up and out of the light collection well.

Image
Image

NOTE:
•Do NOT bend the LED box where the wire goes into the top, it may break it because of the stainless steel support wire.
•Do NOT pull the wiring up from the body. That may break it also.


NOTE: The REM T3 does not interfere with the Tritium Bar so in total darkness you can still rely on that as a light source if desired.

NOTE: You may notice a little light leakage out the top of the glass that is in front of the LED housing. You may place a strip of black vinyl tape over this area if you chose, to eliminate the small light leakage there. This use is optional and most users find it unnecessary.

NOTE: When using the REM T3 in total darkness, with no tactical lights in use, you may notice a slight glow on the front light collector within short distances (less than 10 feet.) This does not interfere with use of the REM T3. You can place a small piece of vinyl tape to cover the front light collector for these conditions. The use is optional and most users find it unnecessary. If you choose to use tape, place the tape on the side of the Ring Sight for easy accessibility.

Battery Replacement
Hold the “numbered part” of the Rheostat so it doesn’t turn. Turn the outside Rheostat battery cover counter clockwise to remove cover. The REM T3 uses one Lithium 3volt CR2032 battery. This package contains ONE spare battery for your convenience.

Warranty
This Product is warranted against original defects in material and/or manufacturing for one year. This warranty is void if the unit has been abused, disassembled, or modified/tampered with in any way from its original configuration.

This warranty does not apply to defects caused by normal wear and tear, improper handling, incorrect installation, accidents, and alterations/modifications to the original configuration, repairs made by unauthorized parties, aftermarket accessories, or abnormal use.

Contact Us
We hope you find the REM T3 to be a great enhancement. We invite your comments. If you have any questions, concerns or comments, please contact us at 978-852-8584 or [email protected].

INSERTING LED HOUSING

1) Insert the LED Housing into the Light Collection Well at a 45 degree angle. VINYL GASKET SIDE FIRST. Make sure the top of the Housing is lined up with the top of the glass.
2) Press down the other side of the Housing so it wedges between the Ring Sight walls.

Image
Image
Image

PEACE THROUGH STRENGTH
http://www.M1bullpup.com" onclick="window.open(this.href);return false;

User avatar
M1P90
Forum Supporter
Posts: 324
Joined: 20 Aug 2008, 08:19
Location: Socialist Republic of Mass.
Contact:

Re: Reticule Enhancement Module T3 (sales)

Post by M1P90 » 08 Nov 2008, 04:16

Sorry about losing this thread and the previous posts. It was locked up and I couldn't make any changes so I had to restart it.

Good news. I have received enough parts from Monolith Arms to make 75 units. I just made and shipped out 15 units and have 15 more orders to fill. I also promised MagParts 20 units so that means I will have 25 left for stock. :clap:

I have some units going out to an Air Force Base for thier testing and if they adopted them they are going to order a ton. :patriot:
Image

PEACE THROUGH STRENGTH
http://www.M1bullpup.com" onclick="window.open(this.href);return false;

User avatar
jmz5
Site Admin
Posts: 11108
Joined: 18 Aug 2008, 21:26

Re: Reticule Enhancement Module T3 (sales)

Post by jmz5 » 08 Nov 2008, 06:04

M1P90 wrote:
I have some units going out to an Air Force Base for thier testing and if they adopted them they are going to order a ton. :patriot:
That would be awesome! :thumb:
كاف

t1210
Member
Posts: 398
Joined: 20 Aug 2008, 17:52

Re: Reticule Enhancement Module T3 (sales)

Post by t1210 » 08 Nov 2008, 18:34

M1P90 wrote:Sorry about losing this thread and the previous posts. It was locked up and I couldn't make any changes so I had to restart it.

Good news. I have received enough parts from Monolith Arms to make 75 units. I just made and shipped out 15 units and have 15 more orders to fill. I also promised MagParts 20 units so that means I will have 25 left for stock. :clap:

I have some units going out to an Air Force Base for thier testing and if they adopted them they are going to order a ton. :patriot:
Good luck,
Mine works great.

User avatar
M1P90
Forum Supporter
Posts: 324
Joined: 20 Aug 2008, 08:19
Location: Socialist Republic of Mass.
Contact:

Re: Reticule Enhancement Module T3 (sales)

Post by M1P90 » 06 Dec 2008, 09:09

12/06/08

I'm finally caught up with all backorders and I now have stock on hand of each color! :clap:

I can now ship the next day after payment is received. :thumb:

Just in time for Christmas! :D
Image

PEACE THROUGH STRENGTH
http://www.M1bullpup.com" onclick="window.open(this.href);return false;

User avatar
Cyberfly
Global Moderator
Posts: 10624
Joined: 19 Aug 2008, 18:44
custom title: Mens Room Attendant
Location: SE OKlahoma

Re: Reticule Enhancement Module T3 (sales)

Post by Cyberfly » 07 Dec 2008, 00:27

Yay!!
I know I brag on mine every chance I get, and I love showing it off to folks. I think the reticle enhancement is as much of a showpiece as the PS90 itself!
Great job, Chris!
Never confuse 'The will of the Majority' with 'The will of God'.
**This post created with 100% recycled photons!**

dapenko
Junior Member
Posts: 7
Joined: 21 Oct 2008, 06:50
Location: Dallas/Fort Worth

Re: Reticule Enhancement Module T3 (sales)

Post by dapenko » 30 Dec 2008, 09:53

I just ordered one today. I can't wait to get it!

User avatar
M1P90
Forum Supporter
Posts: 324
Joined: 20 Aug 2008, 08:19
Location: Socialist Republic of Mass.
Contact:

Re: Reticule Enhancement Module T3 (sales)

Post by M1P90 » 31 Dec 2008, 05:51

dapenko wrote:I just ordered one today. I can't wait to get it!
I'm shipping yours out right now. You should probably get it Friday or Saturday. :thumb:

Happy New Year!

I have 50 red units , 6 green units, 6 blue units and 2 amber units in stock right now. I supply Magazineparts.com with the red units and they usually order 20 at a time. :D
Image

PEACE THROUGH STRENGTH
http://www.M1bullpup.com" onclick="window.open(this.href);return false;

EARS
Senior Member
Posts: 3370
Joined: 20 Aug 2008, 09:43
Location: Rochester New York
Contact:

Re: Reticule Enhancement Module T3 (sales)

Post by EARS » 06 Feb 2009, 06:37

Chris,

My red reticle enhancement light arrived Wednesday. The biggest mistake I made, I not getting one along time ago. I can not believe how great it work. I no longer have to search for the cross hairs, they are just waiting to "jump out at me". Besides the unit being so great, the price is even greater. Thanks, from a very, very satisfied customer.

EARS
Senior Member
Posts: 3370
Joined: 20 Aug 2008, 09:43
Location: Rochester New York
Contact:

Re: Reticule Enhancement Module T3 (sales)

Post by EARS » 16 Feb 2009, 16:15

I'm glad you sent two batteries. I took my PS90 out of it's case today, found the light switch on. The reticle was still lit, of course it was not as bright. I'll have to get another battery to make sure I have another on hand. I can't believe it lasted so long.

MontanaSheriff
Junior Member
Posts: 23
Joined: 27 Mar 2009, 18:18

Re: Reticule Enhancement Module T3 (sales)

Post by MontanaSheriff » 17 Apr 2009, 12:21

Ears,

I always keep a couple of those batteries around. They are probably the most popular of the "coin" style batteries used for scopes, etc..

Wallyworld sells them in two packs.

-MontanaSheriff

User avatar
Cyberfly
Global Moderator
Posts: 10624
Joined: 19 Aug 2008, 18:44
custom title: Mens Room Attendant
Location: SE OKlahoma

Re: Reticule Enhancement Module T3 (sales)

Post by Cyberfly » 17 Apr 2009, 15:07

I got the blue. I LOVE it!!
Never confuse 'The will of the Majority' with 'The will of God'.
**This post created with 100% recycled photons!**

panzertruppe
Junior Member
Posts: 15
Joined: 20 Sep 2009, 19:12

Re: Reticule Enhancement Module T3 (sales)

Post by panzertruppe » 24 Sep 2009, 17:55

I noticed the battery life depends on the "color",

Which color has the longest battery life... Man, I'm in it for ammo and mags and now I'll be in it for this... Looks great... Saving pennies now...

panzertruppe

User avatar
M1P90
Forum Supporter
Posts: 324
Joined: 20 Aug 2008, 08:19
Location: Socialist Republic of Mass.
Contact:

Re: Reticule Enhancement Module T3 (sales)

Post by M1P90 » 24 Sep 2009, 19:32

REM T3 Battery test results.


The Red color lasted 220 hours of continuous use.


:D
Image

PEACE THROUGH STRENGTH
http://www.M1bullpup.com" onclick="window.open(this.href);return false;

panzertruppe
Junior Member
Posts: 15
Joined: 20 Sep 2009, 19:12

Re: Reticule Enhancement Module T3 (sales)

Post by panzertruppe » 02 Mar 2010, 03:55

Thnx M1P90,

I found the answer soon as I asked this question... Still scoutinig out this site... That's incredible the Blue is 2x longer + than Amber...

I was looking at your examples above... I used to sell nite sites and always got the question about which color to choose.... Well, ROYGBIV was my initial theory initroduced.... Guys would buy red and bring them back, "I can't see these things..."

Well, as you approach the infrared on red side of visible spectrum and the Ultra violet on violet side of vis spectrum, you get closer to the non-visible spectrum...

Yellow and Green rite in middle, furthest from the invisible spectrums... I like the blue though so it'll be green or blue considering batt life...

M1P90, you're doing a great job marketing this, thnx for your efforts and hope to talk to you soon.. Thanks for efforts and feedback... Honest business deserves success...

panzertruppe

User avatar
M1P90
Forum Supporter
Posts: 324
Joined: 20 Aug 2008, 08:19
Location: Socialist Republic of Mass.
Contact:

Re: Reticule Enhancement Module T3 (sales)

Post by M1P90 » 24 Aug 2011, 11:59

bump
Image

PEACE THROUGH STRENGTH
http://www.M1bullpup.com" onclick="window.open(this.href);return false;

User avatar
M1P90
Forum Supporter
Posts: 324
Joined: 20 Aug 2008, 08:19
Location: Socialist Republic of Mass.
Contact:

Re: Reticule Enhancement Module T3 (sales)

Post by M1P90 » 06 Jul 2015, 07:01

:gavel: As of today 7/6/15 all future orders are Backordered about 60 days. I am having aluminum molds made so once the new REMs start coming off the line there will be a price reduction. I am shooting for around $50 each. I'll post the new price once we get closer to full production.

Stay tuned...

Chris
http://www.M1Bullpup.com" onclick="window.open(this.href);return false;
Image

PEACE THROUGH STRENGTH
http://www.M1bullpup.com" onclick="window.open(this.href);return false;

User avatar
M1P90
Forum Supporter
Posts: 324
Joined: 20 Aug 2008, 08:19
Location: Socialist Republic of Mass.
Contact:

Re: Reticule Enhancement Module T3 (sales)

Post by M1P90 » 03 Apr 2016, 05:16

I have stopped taking any new orders of the REM T3s, REM T3Bs and REM T3GDs until I get the new designed REM on the market. It should take about 6 months. I will be filling all backorders within the next months as parts trickle in.
I have found a good Molding company that will mass produce these so the new price point will be around $40. It will take time to get the new molds made and get the production going.
You will love the new REMs and Packaging! :)

Chris
Image

PEACE THROUGH STRENGTH
http://www.M1bullpup.com" onclick="window.open(this.href);return false;

NLVMike
Member
Posts: 449
Joined: 18 Sep 2008, 17:06
Location: Las Vegas, NV

Re: Reticule Enhancement Module T3 (sales)

Post by NLVMike » 03 Apr 2016, 07:02

I may have to buy another PS90. Cant wait

User avatar
M1P90
Forum Supporter
Posts: 324
Joined: 20 Aug 2008, 08:19
Location: Socialist Republic of Mass.
Contact:

Re: Reticule Enhancement Module T3 (sales)

Post by M1P90 » 01 Feb 2018, 12:58

It Has been a loooooooong tedious journey but I am back in business. I just receive my shipment of REM T3s and REM T3GD all packaged and ready to ship. The REM T3Bs will still be made by me and I will still attach it to your ring sight for free if you like. The new price of these are $39.95. My website is up and running so you can order them there. www.M1Bullpup.com
I also now have the REM 21 that attaches to the Mepro 21 sight. That is $29.95. I'm happy to finally be back! :mrgreen:
Image

PEACE THROUGH STRENGTH
http://www.M1bullpup.com" onclick="window.open(this.href);return false;

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest