.22 TCM
.22 TCM
Discussion of the new Fred Craig .22 TCM and 1911 pistol that will also handle 9mm with the additional barrel and spring (included). While I have no regrets on purchasing my FiveseveN, the factory support of this caliber for the civilian community is weak. Fred, at Atomitronx http://atomitronx.com/index.html, in conjunction with Armscor http://www.armscor.com.ph/home.htm have produced a winner with the .22 TCM -- with the included 9mm barrel/spring. Just my opinion folks -- we'll see how the two calibers compete in the future.
Re: .22 TCM
Caliber has been discussed in length a little bit here. They make no mention whether or not velocity is achieveable with other bullets besides their own. Not to mention ammunition cost is $5-6 more per box than SS197SR. There is already ammo available that does the same velocity as the .22 TCM. Lets not forget you're using a 1911 firearm that weighs 38 ounces UNLOADED, to the 5.7s 26 ounces fully loaded. It's nice you can order a 9mm barrel to go with it, but I see no advantage of the .22 TCM over the 5.7
Re: .22 TCM
The 9mm barrel/spring is included in the estimated $720 range. According to the recent article in the "American Handgunner", .22 TCM Micro-Mag ammo is $20 box of 50, $350 per case of 1,000. Custom reloading is available for $12.50 a box (customer brass).
Re: .22 TCM
I'm pulling prices right off the manufacturer's website..
- panzermk2
- Forum Supporter
- Posts: 12382
- Joined: 19 Aug 2008, 15:51
- Location: Pr. CEO Elite Ammunition
- Contact:
Re: .22 TCM
For starters lets look at their bullet and just how limited you are. You can only use their 80+ year old left over 22 Hornet bullet. Do to length issues you can't even use the 30gr V-max bullet.
Velocity is irrelevant since our 40gr load matches theirs from a shorter barrel.
Also as a PDW round the supper short soft point bullet with a squared sectional density (Think I just made up a new term) beyond 50 yards I can't help but speculate just how inaccurate this short bullet will be.
Velocity is irrelevant since our 40gr load matches theirs from a shorter barrel.
Also as a PDW round the supper short soft point bullet with a squared sectional density (Think I just made up a new term) beyond 50 yards I can't help but speculate just how inaccurate this short bullet will be.
Jay Wolf
Pr. Elite Ammunition
Pr. Elite Ammunition
"Engineers, the oompa-loompas of science!"
Be'ein Tachbulot Yipol Am Veteshua Berov Yoetz
- flyingirish04
- Gold Member
- Posts: 4784
- Joined: 25 Aug 2008, 21:42
- custom title: Mtn Man in Flatland
- Location: Great Plains, USA
Re: .22 TCM
Yeah, I don't think this brings anything to the table as far as the 5.7 goes. I am not an FN fanatic, and I can see that.
Killed Two Stones with One Bird.
Re: .22 TCM
Does anyone know when this product will actually be available?
Considering that it can switch between 9mm and .22 tcm, would it be posssible to switch calibres in other guns with a barrel change? Because If I could buy a reasonably priced conversion barrel for a CZ 9mm I would be all over this calibre.
Considering that it can switch between 9mm and .22 tcm, would it be posssible to switch calibres in other guns with a barrel change? Because If I could buy a reasonably priced conversion barrel for a CZ 9mm I would be all over this calibre.
Re: .22 TCM
i just posted in a thread that they are hitting the streets now.
Re: .22 TCM
jnomad66 wrote:Does anyone know when this product will actually be available?
Considering that it can switch between 9mm and .22 tcm, would it be posssible to switch calibres in other guns with a barrel change? Because If I could buy a reasonably priced conversion barrel for a CZ 9mm I would be all over this calibre.
I mean you could convert just about any gun to a smaller caliber and make it work but I doubt that armscor is making barrels to convert other platforms to their proprietary (and unproven) round. Basically if you wanted to throw a lot of money into having a CZ converted to .22tcm you could. But I have not yet heard of anyone mass producing conversion kits.
nrv216
Re: .22 TCM
It would make far more sense to produce a 1911 that fires 5.7x28mm IMO.
Re: .22 TCM
The 1911 grip doesn't have enough room to fit the length of the round.Valorius wrote:It would make far more sense to produce a 1911 that fires 5.7x28mm IMO.
Re: .22 TCM
Hey fuzzy,
Your new ferret picture has a big butt! I just posted a reply in the other thread about the .22 tcm pistol. Would it be more appropriate here?
nrv216
Your new ferret picture has a big butt! I just posted a reply in the other thread about the .22 tcm pistol. Would it be more appropriate here?
nrv216
Re: .22 TCM
lol, big butt? Ok...nrv216 wrote:Hey fuzzy,
Your new ferret picture has a big butt! I just posted a reply in the other thread about the .22 tcm pistol. Would it be more appropriate here?
nrv216
It is fine in either thread, if you want me to move it here just let me know.
Re: .22 TCM
I stopped by the Armscor booth at the SHOT show to handle the TCM. You may recall that I took some photos of it last year at the SHOT show and posted them up here for a little discussion. This year my first question was, "are they shipping?" They were emphatic that the full size had been shipping for about a month. They also had a commander sized TCM on display that they claim would be shipping soon (?). The gun comes with a 9mm barrel and spring. The mags are a standard Para 9mm mag, but they have been modified for the TCM. The front edges of the feed lips have been cut down. The TCM mags will still work for 9mm, but the 9mm mags will not feed TCM. No one else is producing the TCM ammo, but they are a pretty big ammo manufacturer and can likely keep up with demand if it takes off. If you love the 1911 platform and want a 40 grain, 2,000 fps projectile, this is the one. I love both the 1911 and FsN platforms, but I would not consider the TCM a direct competitor. The gun is steel and heavy, and the cartridge is decidely low-tech. Doesn't mean I wouldn't buy one. I mean really, I'm already stereotyped as a 22 mag guy; I shoot an FsN....
-
- Junior Member
- Posts: 15
- Joined: 30 Mar 2012, 08:55
Re: .22 TCM
The Baron's Den in Eugene Oregon had a few of these. I've always considered RIA/Armscor a little cheap. I know nothing of their quality or reliability, but I am considering buying one of these just to compare it to my FN.
- panzermk2
- Forum Supporter
- Posts: 12382
- Joined: 19 Aug 2008, 15:51
- Location: Pr. CEO Elite Ammunition
- Contact:
Re: .22 TCM
Errackeleo wrote:The Baron's Den in Eugene Oregon had a few of these. I've always considered RIA/Armscor a little cheap. I know nothing of their quality or reliability, but I am considering buying one of these just to compare it to my FN.
RIA/Armscor 1911's are like the Norinco 45's of the early 90's. Good platforms to build a nice 45. I bought one for my brother in law. Fit sucked, finish was pretty good parts where junk. So pitched everything but the frame, slide and barrel. Replaced everything with a combination of Wilson and Kings custom parts.
22 TCM biggest issue is and will be bullet limitations. The 5.7x28 can easily match ballistics but with much better bullets. BOZ would smoke it.
Jay Wolf
Pr. Elite Ammunition
Pr. Elite Ammunition
"Engineers, the oompa-loompas of science!"
Be'ein Tachbulot Yipol Am Veteshua Berov Yoetz
Re: .22 TCM
I wonder if the bullet limitation is coming into play. I see .22TCM can be had from Armscor in 36gr, but it's 200 fps slower than the 40gr SP they sell...
-
- Junior Member
- Posts: 152
- Joined: 27 Mar 2011, 08:57
22 TCM
Anyone have or used one of these?
It is an interesting little cartridge, with a velocity of over 2000 ft/s... in a 1911 platform!
I imagine that it would be even more devastating out of a rifle.
Comes with a spare 9mm replacement barrel as well. Two guns in one!
All for around $600
http://www.gunbroker.com/Auction/ViewIt ... =304534293" onclick="window.open(this.href);return false;
What do you guys think?
It is an interesting little cartridge, with a velocity of over 2000 ft/s... in a 1911 platform!
I imagine that it would be even more devastating out of a rifle.
Comes with a spare 9mm replacement barrel as well. Two guns in one!
All for around $600
http://www.gunbroker.com/Auction/ViewIt ... =304534293" onclick="window.open(this.href);return false;
What do you guys think?
- Rapier1772
- Global Moderator
- Posts: 12939
- Joined: 20 Aug 2008, 09:00
- Location: Benton City, WA
Re: .22 TCM
Merged...
How to post pics & videos: viewtopic.php?f=3&t=6363
Contrary to popular belief, you CAN fix stupid - it's just illegal.
Re: .22 TCM
It's very tempting, especially at that price.
- panzermk2
- Forum Supporter
- Posts: 12382
- Joined: 19 Aug 2008, 15:51
- Location: Pr. CEO Elite Ammunition
- Contact:
Re: .22 TCM
Very limited bullet choices due to length limitations.
Jay Wolf
Pr. Elite Ammunition
Pr. Elite Ammunition
"Engineers, the oompa-loompas of science!"
Be'ein Tachbulot Yipol Am Veteshua Berov Yoetz
Re: .22 TCM
Interesting. Wonder how that bullet design would play into soft armor penetration from the 22TCM
Last edited by Buffman on 24 Sep 2012, 17:44, edited 1 time in total.
- Rapier1772
- Global Moderator
- Posts: 12939
- Joined: 20 Aug 2008, 09:00
- Location: Benton City, WA
Re: .22 TCM
linky no worky
How to post pics & videos: viewtopic.php?f=3&t=6363
Contrary to popular belief, you CAN fix stupid - it's just illegal.
- Esteves
- Wiki Moderator
- Posts: 3168
- Joined: 20 Aug 2008, 10:23
- custom title: Shhh!
- Location: Tucson, AZ
Re: .22 TCM
Yeah, the economy is down, and...Rapier1772 wrote:linky no worky
--
S
© 2004-2019 Esteves
Political tags — such as royalist, communist, democrat, populist, fascist, liberal, conservative,
and so forth — are never basic criteria. The human race divides politically into those who want
people to be controlled and those who have no such desire.
S
© 2004-2019 Esteves
Political tags — such as royalist, communist, democrat, populist, fascist, liberal, conservative,
and so forth — are never basic criteria. The human race divides politically into those who want
people to be controlled and those who have no such desire.
Re: .22 TCM
try again
- Rapier1772
- Global Moderator
- Posts: 12939
- Joined: 20 Aug 2008, 09:00
- Location: Benton City, WA
Re: .22 TCM
No.
You're too late. I've lost interest in you smeggin' video. :skep: :p
You're too late. I've lost interest in you smeggin' video. :skep: :p
How to post pics & videos: viewtopic.php?f=3&t=6363
Contrary to popular belief, you CAN fix stupid - it's just illegal.
Re: .22 TCM
Just got back from the range with my new 22TCM, first impressions, weapon's fit and finish are very good, have not had any problem finding ammo or extra mags. Trigger pull is great, no takeup, very crisp, measured little over 3 lbs. Has adjustable sights , frontsight is blade type, black, hard to see, rear sight two white dots, works well. Fired 100 rounds, gun performed flawless, sounds like a cannon with fireball, hardly and kick,very easy to keep on target. Did not have a chrono available, gonna get one, when I do I will report back. Paid 599.00 for the weapon, comes with 9mm barrel and spring, one 18 rnd. mag., just called Armscor parts in Nevada and ordered two additional mags, 34.00 each,shipped out today. Over all I was pleased with the weapon.
-
- Junior Member
- Posts: 16
- Joined: 25 Dec 2012, 15:55
- Location: Florida, Treasure coast
- Contact:
Re: .22 TCM
How much is a box of ammo? Webb site says $25.00, can't find it around here for that.justa22 wrote:Just got back from the range with my new 22TCM, first impressions, weapon's fit and finish are very good, have not had any problem finding ammo or extra mags. Trigger pull is great, no takeup, very crisp, measured little over 3 lbs. Has adjustable sights , frontsight is blade type, black, hard to see, rear sight two white dots, works well. Fired 100 rounds, gun performed flawless, sounds like a cannon with fireball, hardly and kick,very easy to keep on target. Did not have a chrono available, gonna get one, when I do I will report back. Paid 599.00 for the weapon, comes with 9mm barrel and spring, one 18 rnd. mag., just called Armscor parts in Nevada and ordered two additional mags, 34.00 each,shipped out today. Over all I was pleased with the weapon.
- blueorison
- Competition/Training Mod
- Posts: 10672
- Joined: 11 Apr 2009, 14:28
- custom title: UT/EA Pistol Captain
- Contact:
Re: .22 TCM
Sounds like a lot of fun.
Since it comes with a 9mm conversion and it's an ARMSCOR, that's a great deal. You could shoot Single Stack division with it. :thumb:
Since it comes with a 9mm conversion and it's an ARMSCOR, that's a great deal. You could shoot Single Stack division with it. :thumb:
Never attribute to malice that which can be explained by stupidity.
The shooter will always matter more than the gear ever will.
Stop relying on others to do the work for you.
Shoot more, worry less.
The shooter will always matter more than the gear ever will.
Stop relying on others to do the work for you.
Shoot more, worry less.
-
- Junior Member
- Posts: 3
- Joined: 21 Dec 2013, 14:18
- Location: Missouri
TCM22
Curious if anyone has tried the new TCM22 cartridge. I just Got a Commander length Rock Island in TCM22. The 5" comes with a 9mm conversion barrel. Not a big fan of hi-cap 1911's, but this is a fun pistol to shoot. Reminds me of a tamer .357Sig with it's muzzle flash. I would estimate velocity in the neighborhood of 1700fps. With a 40gr bullet, it hits harder than my 5.7 but not quite as accurate. May end up a fad, but I'm ok with that too. Hornady gas dies on the market for reloading.
- Rapier1772
- Global Moderator
- Posts: 12939
- Joined: 20 Aug 2008, 09:00
- Location: Benton City, WA
Re: .22 TCM
Tactical search to the rescue! :laugh: (It was that or "search function n00b")
Merged
SOS, we have a few people who own and/or have shot the TCM, please check out the previous posts & video and let us know if you have more questions.
However, if you just got a cool gun, you have to post a pic or two Instructions linked in my sig line
Merged
SOS, we have a few people who own and/or have shot the TCM, please check out the previous posts & video and let us know if you have more questions.
However, if you just got a cool gun, you have to post a pic or two Instructions linked in my sig line
How to post pics & videos: viewtopic.php?f=3&t=6363
Contrary to popular belief, you CAN fix stupid - it's just illegal.
- blueorison
- Competition/Training Mod
- Posts: 10672
- Joined: 11 Apr 2009, 14:28
- custom title: UT/EA Pistol Captain
- Contact:
Re: .22 TCM
One is on the way for me to test out; just in time.. going to do the next round of testing on IIIA for the latest iteration of rounds Grimmond sent me.
Never attribute to malice that which can be explained by stupidity.
The shooter will always matter more than the gear ever will.
Stop relying on others to do the work for you.
Shoot more, worry less.
The shooter will always matter more than the gear ever will.
Stop relying on others to do the work for you.
Shoot more, worry less.
Re: .22 TCM
Stop screwing around with the 1911 platform for the high velocity - small rounds. How about an advanced thumb safety, target sight, double stacked magazine Tokarev in 5.7x28?
- panzermk2
- Forum Supporter
- Posts: 12382
- Joined: 19 Aug 2008, 15:51
- Location: Pr. CEO Elite Ammunition
- Contact:
Re: .22 TCM
Surfgun wrote:Stop screwing around with the 1911 platform for the high velocity - small rounds. How about an advanced thumb safety, target sight, double stacked magazine Tokarev in 5.7x28?
Already being worked on.
Jay Wolf
Pr. Elite Ammunition
Pr. Elite Ammunition
"Engineers, the oompa-loompas of science!"
Be'ein Tachbulot Yipol Am Veteshua Berov Yoetz
Re: .22 TCM
What will be the country of origin of this 21st Century Tokarev?panzermk2 wrote:Surfgun wrote:Stop screwing around with the 1911 platform for the high velocity - small rounds. How about an advanced thumb safety, target sight, double stacked magazine Tokarev in 5.7x28?
Already being worked on.
- blueorison
- Competition/Training Mod
- Posts: 10672
- Joined: 11 Apr 2009, 14:28
- custom title: UT/EA Pistol Captain
- Contact:
Re: .22 TCM
Either your statement makes no sense, or I don't comprehend it.Surfgun wrote:Stop screwing around with the 1911 platform for the high velocity - small rounds. How about an advanced thumb safety, target sight, double stacked magazine Tokarev in 5.7x28?
You want a double stacked Tokarev pistol chambered in 5.7x28. Why...?
Never attribute to malice that which can be explained by stupidity.
The shooter will always matter more than the gear ever will.
Stop relying on others to do the work for you.
Shoot more, worry less.
The shooter will always matter more than the gear ever will.
Stop relying on others to do the work for you.
Shoot more, worry less.
- blueorison
- Competition/Training Mod
- Posts: 10672
- Joined: 11 Apr 2009, 14:28
- custom title: UT/EA Pistol Captain
- Contact:
Re: .22 TCM
The pistol is backordered
Oh well, it's still coming; just more slowly
Oh well, it's still coming; just more slowly
Never attribute to malice that which can be explained by stupidity.
The shooter will always matter more than the gear ever will.
Stop relying on others to do the work for you.
Shoot more, worry less.
The shooter will always matter more than the gear ever will.
Stop relying on others to do the work for you.
Shoot more, worry less.
Re: .22 TCM
blueorison wrote:Either your statement makes no sense, or I don't comprehend it.Surfgun wrote:Stop screwing around with the 1911 platform for the high velocity - small rounds. How about an advanced thumb safety, target sight, double stacked magazine Tokarev in 5.7x28?
You want a double stacked Tokarev pistol chambered in 5.7x28. Why...?
The 7.62x25 is bit fatter than the 5.7x28. So the Tokarev (the extra length of the Yugo M57 would be preferable) magazine width would not even have to altered to be a staggered column 5.7 magazine, it would need an altered top end / feed lips and follower.
A cocked and locked high capacity Tokarev, what is not to like?
- blueorison
- Competition/Training Mod
- Posts: 10672
- Joined: 11 Apr 2009, 14:28
- custom title: UT/EA Pistol Captain
- Contact:
Re: .22 TCM
Ergonomics, trigger, sights, uhh basically everything is not to like.Surfgun wrote:blueorison wrote:Either your statement makes no sense, or I don't comprehend it.Surfgun wrote:Stop screwing around with the 1911 platform for the high velocity - small rounds. How about an advanced thumb safety, target sight, double stacked magazine Tokarev in 5.7x28?
You want a double stacked Tokarev pistol chambered in 5.7x28. Why...?
The 7.62x25 is bit fatter than the 5.7x28. So the Tokarev (the extra length of the Yugo M57 would be preferable) magazine width would not even have to altered to be a staggered column 5.7 magazine, it would need an altered top end / feed lips and follower.
A cocked and locked high capacity Tokarev, what is not to like?
Never attribute to malice that which can be explained by stupidity.
The shooter will always matter more than the gear ever will.
Stop relying on others to do the work for you.
Shoot more, worry less.
The shooter will always matter more than the gear ever will.
Stop relying on others to do the work for you.
Shoot more, worry less.
Re: .22 TCM
Ergonomics, trigger, sights, uhh basically everything is not to like.[/quoteblueorison wrote:Surfgun wrote:blueorison wrote:Either your statement makes no sense, or I don't comprehend it.Surfgun wrote:Stop screwing around with the 1911 platform for the high velocity - small rounds. How about an advanced thumb safety, target sight, double stacked magazine Tokarev in 5.7x28?
You want a double stacked Tokarev pistol chambered in 5.7x28. Why...?
The 7.62x25 is bit fatter than the 5.7x28. So the Tokarev (the extra length of the Yugo M57 would be preferable) magazine width would not even have to altered to be a staggered column 5.7 magazine, it would need an altered top end / feed lips and follower.
A cocked and locked high capacity Tokarev, what is not to like?
Put on an arched backstrap, customized grip panels, pollish the trigger bow/sear interface, a set of new sights, fixed. Remember, without the 1911 as the starting point, the Tokarev would have never happened. The bare bones are there, with spit and pollish, the Tokarev can be turned from a relatively crude service pistol into a trim classic combat pistol (imagine Wilson Combat aftermarket parts). The Tokarev, just has never had Americans to customize it, to turn it into something more refined.
Last edited by Surfgun on 20 Feb 2015, 20:13, edited 2 times in total.
- blueorison
- Competition/Training Mod
- Posts: 10672
- Joined: 11 Apr 2009, 14:28
- custom title: UT/EA Pistol Captain
- Contact:
Re: .22 TCM
Surfgun wrote:Ergonomics, trigger, sights, uhh basically everything is not to like.[/quoteblueorison wrote:Surfgun wrote:blueorison wrote:Either your statement makes no sense, or I don't comprehend it.Surfgun wrote:Stop screwing around with the 1911 platform for the high velocity - small rounds. How about an advanced thumb safety, target sight, double stacked magazine Tokarev in 5.7x28?
You want a double stacked Tokarev pistol chambered in 5.7x28. Why...?
The 7.62x25 is bit fatter than the 5.7x28. So the Tokarev (the extra length of the Yugo M57 would be preferable) magazine width would not even have to altered to be a staggered column 5.7 magazine, it would need an altered top end / feed lips and follower.
A cocked and locked high capacity Tokarev, what is not to like?
Put on an arched backstrap, customized grip panels, pollish the trigger bow/sear interface, a set of new sights, fixed. Remember, without the 1911 as the starting point, the Tokarev would have never happened. The Tokarev, just never had Americans to customize it, to turn it into something more refined.
Nailed it! :thumb:
The first time I shot a tok, it was @ 25yds. It was supremely accurate. 5 shots were about 3-4 inches with the pathetic sights and 8lb trigger.
I think the main draw of the tok - the cheap, plentiful ammo - is gone. So...
Never attribute to malice that which can be explained by stupidity.
The shooter will always matter more than the gear ever will.
Stop relying on others to do the work for you.
Shoot more, worry less.
The shooter will always matter more than the gear ever will.
Stop relying on others to do the work for you.
Shoot more, worry less.
Re: .22 TCM
It's not gone in my basement. Don't have a Tok though...
Re: .22 TCM
My friend has a .22TCM that's going to get some use this summer Hope to put it up against different types of armor. Are there good reloading recipes out there for them, or do they require the SP style bullets like factory for feeding?
- panzermk2
- Forum Supporter
- Posts: 12382
- Joined: 19 Aug 2008, 15:51
- Location: Pr. CEO Elite Ammunition
- Contact:
Re: .22 TCM
CZ-52 variant would be even better I suppose.
Jay Wolf
Pr. Elite Ammunition
Pr. Elite Ammunition
"Engineers, the oompa-loompas of science!"
Be'ein Tachbulot Yipol Am Veteshua Berov Yoetz
- panzermk2
- Forum Supporter
- Posts: 12382
- Joined: 19 Aug 2008, 15:51
- Location: Pr. CEO Elite Ammunition
- Contact:
Re: .22 TCM
Buffman wrote:My friend has a .22TCM that's going to get some use this summer Hope to put it up against different types of armor. Are there good reloading recipes out there for them, or do they require the SP style bullets like factory for feeding?
Due to usable bullets and OAL you are very limited.
Jay Wolf
Pr. Elite Ammunition
Pr. Elite Ammunition
"Engineers, the oompa-loompas of science!"
Be'ein Tachbulot Yipol Am Veteshua Berov Yoetz
Re: .22 TCM
Dum Dum T6?
Who is online
Users browsing this forum: No registered users and 10 guests