Page 1 of 1

FS2000 parts

Posted: 12 May 2010, 08:27
by marrandy
Parts for the FS2000 - Can this be made sticky. I'll update as I get more info.

Bob Ailes
Customer Support Manager
703-288-3500 ext. 122 <-- Best way to contact FNH
[email protected] <-- Least reliable way to contact FNH


FNH USA
PO Box 697
McLean, VA 22101
Phone: 703-288-1292
Fax: 703-288-1730
E-Mail: [email protected]


Browning Parts
One Browning Place
Arnold, Missouri 63010
800-635-1321/636-287-6800
Fax: 800-817-4755

They are both the same and no, there is no price difference.

NOTE: Amazingly, there is no numbered (or otherwise) exploded parts diagram and number to part # list. I have tried several times to no avail. It is not available to the public. So, with no names for the parts, we have to describe them and attach the correct names ourselves. Pretty terrible, I know. But what can we do - harass/ask Bob I guess ;-)
---------------------------------------------------------
Always call Bob Ailes first as broken/defective parts may be under warranty. If you wish to order parts in case of failure, this is the short list I have collected. FWIW.

Bolt Assy. - $510 NOTE: The bolt is NOT available separately. It can only be ordered complete.

Extractor Part# BFS2000074 - $103

Extractor Spring Part# BFS2000075 -

Firing Pin Part# BFS2000061 - $102

Gas Rings Part# BFS2000033 qty.3 - $6

Hammer group Assy. - Not available - slides out after removing rubber stock plate - Note: Rifle has to be sent to FN-USA - again, call Bob Ailes

Handguard Part# BFS2000056 - $10 ??? (That sounds a little cheap...can anyone verify that price).

Operating handle Part # ??? - $36.00

Piston Part# BFS2000032 - $26

Switch Part# BFS2000058 - $15 Note: This is the part you see when opening the inspection port/toilet lid


High desert Dog has Third Party parts - http://www.hi-desertdog.com/index.php?_ ... oductId=55" onclick="window.open(this.href);return false; NOTE: I have nothing to do with this company. Just providing info I come across.

FS2000 upper, 6 x metric Allen socket head screws - $5
Thread your FS2000 barrel - $120
FS2000 threaded match barrel - $379

Further NOTE: They also sell PS90 gear. Type ps90 in the search box on the top left.

PS. Anyone that has other parts info, PM me and I will add it - Thanks.

Re: FS2000 parts

Posted: 12 May 2010, 12:26
by Rapier1772
For the handguard, this was posted on the forum B.C. (before crash) Your number has a 2 in it though, might wanna keep both on hand for reference
Originally posted by JMZ5 1/1/08
You need to call the browning service center to order.
Phone # 1-800-635-1321
Handguard part # BFS000056
MSRP $10

Re: FS2000 parts

Posted: 12 May 2010, 17:17
by marrandy
Rapier1772 wrote:For the handguard, this was posted on the forum B.C. (before crash) Your number has a 2 in it though, might wanna keep both on hand for reference
Originally posted by JMZ5 1/1/08
You need to call the browning service center to order.
Phone # 1-800-635-1321
Handguard part # BFS000056
MSRP $10

Are you sure ?

You will note all the other part numbers start #BFS2...

But thanks for the number and price though :-)

Re: FS2000 parts

Posted: 12 May 2010, 18:09
by Rapier1772
No, I'm not sure. It was something recovered off the old forum after it crashed. I haven't called to order a new yet, kinda like the light I put in :cool: I just copy pasted what I found

Re: FS2000 parts

Posted: 12 May 2010, 19:27
by marrandy
Rapier1772 wrote:No, I'm not sure. It was something recovered off the old forum after it crashed. I haven't called to order a new yet, kinda like the light I put in :cool: I just copy pasted what I found

Well that's OK - we will work it out later.

Some information, even if incorrect is better than no information at all.

At least we can work on incorrect info and fix it.

Just being positive :-)

Not saying your info isn't correct of course.

Re: FS2000 parts

Posted: 26 Apr 2011, 15:18
by Adjuster
I'd like to get two spare switches, a piston and rings, as well as another front hand guard to play with light/laser and remote custom switches/battery setup.

I have had zero problems with the switch that came with the rifle, but it does seem like a part I'd rather not be short of if there is a problem.

I have a radical idea for the front hand guard, and at 10.00, they are cheap enough to test some ideas on.