Quick reloading guide 5.7x28mm

Reloading info for the 5.7x28mm

Moderator: Grantness

Post Reply
jkelley209
Junior Member
Posts: 49
Joined: 26 Dec 2014, 10:19

Quick reloading guide 5.7x28mm

Post by jkelley209 » 16 Oct 2016, 12:18

https://www.youtube.com/watch?v=BlcAoRBJSMQ" onclick="window.open(this.href);return false;
Last edited by jkelley209 on 16 Oct 2016, 19:52, edited 1 time in total.

Toaster
Junior Member
Posts: 51
Joined: 09 Jun 2016, 20:06

Re: Quick reloading guide 5.7x28mm

Post by Toaster » 16 Oct 2016, 17:22

Did I miss the Priming step?

Why you swaging, not brushing? Doesnt that loosen up the pockets a bit sooner?

Any experience with the 3-way RCBS cutter?

That Hornady cleaner/oven doesnt hurt the laquer?

jkelley209
Junior Member
Posts: 49
Joined: 26 Dec 2014, 10:19

Re: Quick reloading guide 5.7x28mm

Post by jkelley209 » 16 Oct 2016, 17:59

The priming step is in there
Don't know about the RCBS
I only swage the ones that are staked
Hornady Magnum ultrasonic cleaner leaves the lacquer perfect

jkelley209
Junior Member
Posts: 49
Joined: 26 Dec 2014, 10:19

Re: Quick reloading guide 5.7x28mm

Post by jkelley209 » 16 Oct 2016, 18:35

You where right about priming I'm editing it now

DoubleJ
Member
Posts: 400
Joined: 10 May 2011, 20:20

Re: Quick reloading guide 5.7x28mm

Post by DoubleJ » 16 Oct 2016, 19:07

Toaster wrote:Did I miss the Priming step?

Why you swaging, not brushing? Doesnt that loosen up the pockets a bit sooner?

Any experience with the 3-way RCBS cutter? -Yes, it won't work, cases are too short

That Hornady cleaner/oven doesnt hurt the laquer?

jkelley209
Junior Member
Posts: 49
Joined: 26 Dec 2014, 10:19

Re: Quick reloading guide 5.7x28mm

Post by jkelley209 » 16 Oct 2016, 19:08

https://www.youtube.com/watch?v=BlcAoRBJSMQ" onclick="window.open(this.href);return false;
This is the one to watch have added footage

Toaster
Junior Member
Posts: 51
Joined: 09 Jun 2016, 20:06

Re: Quick reloading guide 5.7x28mm

Post by Toaster » 17 Oct 2016, 11:43

DoubleJ wrote:
Toaster wrote: Any experience with the 3-way RCBS cutter? -Yes, it won't work, cases are too short

Uhh.....

http://www.fivesevenforum.com/viewtopic ... 0&p=228401" onclick="window.open(this.href);return false;

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests