Page 1 of 1
Quick reloading guide 5.7x28mm
Posted: 16 Oct 2016, 12:18
by jkelley209
https://www.youtube.com/watch?v=BlcAoRBJSMQ" onclick="window.open(this.href);return false;
Re: Quick reloading guide 5.7x28mm
Posted: 16 Oct 2016, 17:22
by Toaster
Did I miss the Priming step?
Why you swaging, not brushing? Doesnt that loosen up the pockets a bit sooner?
Any experience with the 3-way RCBS cutter?
That Hornady cleaner/oven doesnt hurt the laquer?
Re: Quick reloading guide 5.7x28mm
Posted: 16 Oct 2016, 17:59
by jkelley209
The priming step is in there
Don't know about the RCBS
I only swage the ones that are staked
Hornady Magnum ultrasonic cleaner leaves the lacquer perfect
Re: Quick reloading guide 5.7x28mm
Posted: 16 Oct 2016, 18:35
by jkelley209
You where right about priming I'm editing it now
Re: Quick reloading guide 5.7x28mm
Posted: 16 Oct 2016, 19:07
by DoubleJ
Toaster wrote:Did I miss the Priming step?
Why you swaging, not brushing? Doesnt that loosen up the pockets a bit sooner?
Any experience with the 3-way RCBS cutter? -Yes, it won't work, cases are too short
That Hornady cleaner/oven doesnt hurt the laquer?
Re: Quick reloading guide 5.7x28mm
Posted: 16 Oct 2016, 19:08
by jkelley209
https://www.youtube.com/watch?v=BlcAoRBJSMQ" onclick="window.open(this.href);return false;
This is the one to watch have added footage
Re: Quick reloading guide 5.7x28mm
Posted: 17 Oct 2016, 11:43
by Toaster
DoubleJ wrote:Toaster wrote:
Any experience with the 3-way RCBS cutter? -Yes, it won't work, cases are too short
Uhh.....
http://www.fivesevenforum.com/viewtopic ... 0&p=228401" onclick="window.open(this.href);return false;