ATF Rul. 2011-4 “weapon made from a rifle”

Forum for discussing NFA firearms and accessories such as suppressors, SBR and full-auto goodies.
Post Reply
User avatar
Esteves
Wiki Moderator
Posts: 3160
Joined: 20 Aug 2008, 10:23
custom title: Shhh!
Location: Tucson, AZ

ATF Rul. 2011-4 “weapon made from a rifle”

Post by Esteves » 13 Aug 2011, 19:42

http://www.atf.gov/regulations-rulings/ ... 2011-4.pdf" onclick="window.open(this.href);return false;
U.S. Department of Justice
Bureau of Alcohol, Tobacco, Firearms and Explosives
Office of the Director
Washington, DC 20226
26 U.S.C. 5845(a)(3): DEFINITIONS (FIREARM )
26 U.S.C. 5845(a)(4): DEFINITIONS (FIREARM)
26 U.S.C. 5845(c): DEFINITIONS (RIFLE)
27 CFR 479.11: DEFINITIONS (RIFLE)
27 CFR 479.11: DEFINITIONS (PISTOL)
A firearm, as defined by the National Firearms Act (NFA), 26 U.S.C. 5845(a)(3), is made when unassembled parts are placed in close proximity in such a way that they: (a) serve no useful purpose other than to make a rifle having a barrel or barrels of less than 16 inches in length; or (b) convert a complete weapon into such an NFA firearm. A firearm, as defined by 26 U.S.C. 5845(a)(3) and (a)(4), is not made when parts within a kit that were originally designed to be configured as both a pistol and a rifle are assembled or re-assembled in a configuration not regulated under the NFA (e.g., as a pistol, or a rifle with a barrel or barrels of 16 inches or more in length). A firearm, as defined by 26 U.S.C. 5845(a)(3) and (a)(4), is not made when a pistol is attached to a part or parts designed to convert the pistol into a rifle with a barrel or barrels of 16 inches or more in length, and the parts are later unassembled in a configuration not regulated under the NFA (e.g., as a pistol). A firearm, as defined by 26 U.S.C. 5845(a)(4), is made when a handgun or other weapon with an overall length of less than 26 inches, or a barrel or barrels of less than 16 inches in length, is assembled or produced from a weapon originally assembled or produced only as a rifle.
ATF Rul. 2011-4
The Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF) has received requests from individuals to classify pistols that are reconfigured into rifles, for personal use, through the addition of barrels, stocks, and other parts and then returned to a pistol configuration by removal of those components. Specifically, ATF has been asked to determine whether such a pistol, once returned to a pistol configuration from a rifle, becomes a “weapon made from a rifle” as defined under the National Firearms Act (NFA).
Some manufacturers produce firearm receivers and attachable component parts that are designed to be assembled into both rifles and pistols. The same receiver can accept an interchangeable shoulder stock or pistol grip, and a long (16 or more inches in length) or short (less than 16 inches) barrel. These components are sold individually, or as unassembled kits. Generally, the kits include a receiver, a pistol grip, a pistol barrel less than 16 inches in length, a shoulder stock, and a rifle barrel 16 inches or more in length.
- 2 -
Certain parts or parts sets are also designed to allow an individual to convert a pistol into a rifle without removing a barrel or attaching a shoulder stock to the pistol. These parts consist of an outer shell with a shoulder stock into which the pistol may be inserted. When inserted, the pistol fires a projectile through a rifled extension barrel that is 16 inches or more in length, and with an overall length of 26 inches or more. Other parts sets require that certain parts of the pistol, such as the pistol barrel and the slide assembly, be removed from the pistol frame prior to attaching the parts sets. Typically, a separate barrel is sold with the parts set, which is 16 inches or greater in length. The barrel is installed along with an accompanying shoulder stock. The resulting firearm has a barrel of 16 inches or more in length, and an overall length of 26 inches or more.
The NFA, Title 26, United States Code (U.S.C.), Chapter 53, requires that persons manufacturing, importing, transferring, or possessing firearms as defined in the NFA comply with the Act’s licensing, registration, and taxation requirements. The NFA defines the term “firearm” at 26 U.S.C. 5845(a) to include “(3) a rifle having a barrel or barrels of less than 16 inches in length;” (“short-barreled rifle”) and “(4) a weapon made from a rifle if such weapon as modified has an overall length of less than 26 inches or a barrel or barrels of less than 16 inches in length” (“weapon made from a rifle”). The term “rifle” is defined by 26 U.S.C. 5845(c) and 27 CFR 479.11 as “a weapon designed or redesigned, made or remade, and intended to be fired from the shoulder and designed or redesigned and made or remade to use the energy of the explosive in a fixed cartridge to fire only a single projectile through a rifled bore for each single pull of the trigger, and shall include any such weapon which may be readily restored to fire a fixed cartridge.” Although not defined in the NFA, the term “pistol” is defined by the Act’s implementing regulations, 27 CFR 479.11, as “a weapon originally designed, made, and intended to fire a projectile (bullet) from one or more barrels when held in one hand, and having (a) a chamber(s) as an integral part(s) of, or permanently aligned with, the bore(s); and (b) a short stock designed to be gripped by one hand and at an angle to and extending below the line of the bore(s)” (emphasis added).
Unassembled Parts Kits
In United States v. Thompson/Center Arms Company, 504 U.S. 505 (1992), the United States Supreme Court examined whether a short-barreled rifle was “made” under the NFA when a carbine-conversion kit consisting of a single-shot “Contender” pistol was designed so that its handle and barrel could be removed from its receiver, and was packaged with a 21-inch barrel, a rifle stock, and a wooden fore-end. The Court held that, where aggregated parts could convert a pistol into either a regulated short-barreled rifle, or an unregulated rifle with a barrel of 16 inches or more in length, the NFA was ambiguous and applied the “rule of lenity” (i.e., ambiguities in criminal statutes should be resolved in favor of the defendant) so that the pistol and carbine kit, when packaged together, were not considered a “short-barreled rifle” for purposes of the NFA.
However, the Court also explained that an NFA firearm is made if aggregated parts are in close proximity such that they: (a) serve no useful purpose other than to make an NFA firearm (e.g., a receiver, an attachable shoulder stock, and a short barrel); or (b) convert a
- 3 -
complete weapon into an NFA firearm (e.g., a pistol and attachable shoulder stock, or a long-barreled rifle and attachable short barrel). Id. at 511-13.
Assembly of Weapons from Parts Kits
The Thompson/Center Court viewed the parts within the conversion kit not only as a Contender pistol, but also as an unassembled “rifle” as defined by 26 U.S.C. 5845(c). The inclusion of the rifle stock in the package brought the Contender pistol and carbine kit within the "intended to be fired from the shoulder" language in the definition of rifle at 26 U.S.C. 5845(c). Id. at 513 n.6. Thompson/Center did not address the subsequent assembly of the parts. United States v. Ardoin, 19 F.3d 177, 181 (5th Cir. 1994). Based on the definition of “firearm” in 26 U.S.C. 5845(a)(3), if parts are assembled into a rifle having a barrel or barrels of less than 16 inches in length, a regulated short-barreled rifle has been made. See, e.g., United States v. Owens, 103 F.3d 953 (11th Cir. 1997); United States v. One (1) Colt Ar-15, 394 F. Supp. 2d 1064 (W.D.Tenn. 2004). Conversely, if the parts are assembled into a rifle having a barrel or barrels 16 inches in length or more, a rifle not subject to the NFA has been made.
Therefore, so long as a parts kit or collection of parts is not used to make a firearm regulated under the NFA (e.g., a short-barreled rifle or “any other weapon” as defined by 26 U.S.C. 5845(e)), no NFA firearm is made when the same parts are assembled or re-assembled in a configuration not regulated under the NFA (e.g., a pistol, or a rifle with a barrel of 16 inches or more in length). Merely assembling and disassembling such a rifle does not result in the making of a new weapon; rather, it is the same rifle in a knockdown condition (i.e., complete as to all component parts). Likewise, because it is the same weapon when reconfigured as a pistol, no “weapon made from a rifle” subject to the NFA has been made.
Nonetheless, if a handgun or other weapon with an overall length of less than 26 inches, or a barrel or barrels of less than 16 inches in length is assembled or otherwise produced from a weapon originally assembled or produced only as a rifle, such a weapon is a “weapon made from a rifle” as defined by 26 U.S.C. 5845(a)(4). Such a weapon would not be a “pistol” because the weapon was not originally designed, made, and intended to fire a projectile by one hand.
Held, a firearm, as defined by the National Firearms Act (NFA), 26 U.S.C. 5845(a)(3), is made when unassembled parts are placed in close proximity in such a way that they:
(a) Serve no useful purpose other than to make a rifle having a barrel or barrels of less than 16 inches in length (e.g., a receiver, an attachable shoulder stock, and barrel of less than 16 inches in length); or
(b) Convert a complete weapon into such an NFA firearm, including –
(1) A pistol and attachable shoulder stock; and
- 4 -
(2) A rifle with a barrel of 16 inches or more in length, and an attachable barrel of less than 16 inches in length.
Such weapons must be registered and are subject to all requirements of the NFA.
Held further, a firearm, as defined by 26 U.S.C. 5845(a)(3) and (a)(4), is not made when parts in a kit that were originally designed to be configured as both a pistol and a rifle are assembled or re-assembled in a configuration not regulated under the NFA (e.g., as a pistol, or a rifle with a barrel of 16 inches or more in length).
Held further, a firearm, as defined by 26 U.S.C. 5845(a)(3) and (a)(4), is not made when a pistol is attached to a part or parts designed to convert the pistol into a rifle with a barrel of 16 inches or more in length, and the parts are later unassembled in a configuration not regulated under the NFA (e.g., as a pistol).
Held further, a firearm, as defined by 26 U.S.C. 5845(a)(4), is made when a handgun or other weapon with an overall length of less than 26 inches, or a barrel or barrels of less than 16 inches in length, is assembled or produced from a weapon originally assembled or produced only as a rifle. Such weapons must be registered and are subject to all requirements of the NFA.
To the extent this ruling may be inconsistent with any prior letter rulings, they are hereby superseded.
Date approved: July 25, 2011
Kenneth E. Melson
Acting Director
--
S
© 2005-2017 Esteves

Political tags — such as royalist, communist, democrat, populist, fascist, liberal, conservative,
and so forth — are never basic criteria. The human race divides politically into those who want
people to be controlled and those who have no such desire.

User avatar
jmz5
Site Admin
Posts: 11105
Joined: 18 Aug 2008, 21:26
custom title: Proprietor
Location: Pennsylvania
Contact:

Re: ATF Rul. 2011-4 “weapon made from a rifle”

Post by jmz5 » 14 Aug 2011, 04:39

So, my sbr ps90 is no longer a sbr? Its a "weapon made from a rifle"?

Tl;DR, glad to see t/c take on the aft and win.
كاف

SeaHawkDriver-B
Senior Member
Posts: 989
Joined: 11 Nov 2009, 13:15
Location: Embarked on 2 acres of floating Soverign US Territory
Contact:

Re: ATF Rul. 2011-4 “weapon made from a rifle”

Post by SeaHawkDriver-B » 14 Aug 2011, 07:50

Reading through that double-speak gumbo just highlights how ridiculous firearms laws are. It also makes you question what the INTENT of all that crap is. I have a 16" barrel on a rifle and I'm an upstanding citzen. I have a 15.9" barrel on a rifle and now the Federal government assumes i'm some sort of feloneous deviant bent on global destruction. Unless of course you're holding a pistol with a 15.9" barrel, thats okay.... I digress.

MAKES ZERO SENSE

The end result of any of that gobble-dee-gook is a lead slug moving out the end of a barrel. The shoulder stock, barrel length, or tacticool swiss army knife you have attached to your 1911 have zero bearing on bullet velocity, accuracy, or rate of fire. But then why should we expect our non-elected "leaders" at the BATFE to ever have to make sense, or to ever have to be accountable to the public. After all, they are above the law, they're bureaucrats that write regulations.

Thanks for the post Esteves.


"You're not radical ENOUGH" -Andrew Wilkow

Mister Freeze
Senior Member
Posts: 1627
Joined: 25 Nov 2008, 11:11
custom title: 159.6
Location: Somewhere in Texas

Re: ATF Rul. 2011-4 “weapon made from a rifle”

Post by Mister Freeze » 14 Aug 2011, 17:48

http://constitutionwatch.wordpress.com/ ... n-in-2012/" onclick="window.open(this.href);return false;

http://constitutionwatch.wordpress.com/ ... ccomplish/" onclick="window.open(this.href);return false;

As I understood it, any law determined to be unconstitutional is by definition null and void. Opinion or not, the Supreme Court's job is to determine CONSTITUTIONALITY. As the highest law of the land, anything against the Constitution is invalid.

As far as this thread goes, switching from pistol to/from rifle configurations seems ok if you do not, even temporarily, pass through an NFA configuration. Then again, how are they going to know...?

Where does the ATF get it's authority?

User avatar
Esteves
Wiki Moderator
Posts: 3160
Joined: 20 Aug 2008, 10:23
custom title: Shhh!
Location: Tucson, AZ

Re: ATF Rul. 2011-4 “weapon made from a rifle”

Post by Esteves » 14 Aug 2011, 18:54

Mister Freeze wrote:Where does the ATF get it's authority?
I blame the 73rd and the 90th United States Congresses along with Franklin D Roosevelt and Lyndon Johnson.

The NFA and the GCA need to be revoked.
--
S
© 2005-2017 Esteves

Political tags — such as royalist, communist, democrat, populist, fascist, liberal, conservative,
and so forth — are never basic criteria. The human race divides politically into those who want
people to be controlled and those who have no such desire.

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests