PS90 Owners I Need Your HELP!

Discuss rifles chambered for the 5.7x28mm; P90, PS90, and AR57.
Post Reply
Buffman
Silver Member
Posts: 2990
Joined: 12 Jan 2009, 22:48
Location: SW Michigan
Contact:

Re: PS90 Owners I Need Your HELP!

Post by Buffman » 20 Jul 2013, 23:10

yeah that's TMH's stock. He stated that happened after firing some of the EA ammo I had sent him. Mine has not had that happen, but mine pops the mag up on most EA's stuff except S4M and T6

User avatar
panzermk2
Forum Supporter
Posts: 12377
Joined: 19 Aug 2008, 15:51
Location: Pr. CEO Elite Ammunition
Contact:

Re: PS90 Owners I Need Your HELP!

Post by panzermk2 » 21 Jul 2013, 09:35

Buffman wrote:yeah that's TMH's stock. He stated that happened after firing some of the EA ammo I had sent him. Mine has not had that happen, but mine pops the mag up on most EA's stuff except S4M and T6

They really needed to make the P90/PS90 a delayed blow back. Besides a stock fix I have messed with that but like other things I just run out of time in a day.
Jay Wolf
Pr. Elite Ammunition

"Engineers, the oompa-loompas of science!"

Be'ein Tachbulot Yipol Am Veteshua Berov Yoetz
Image

Litehiker
Junior Member
Posts: 85
Joined: 16 Aug 2013, 18:25

Re: PS90 Owners I Need Your HELP! (JB WELD epoxy)

Post by Litehiker » 30 Sep 2013, 19:56

How about renewing the forward edge of the reciever lock hole with JB WELD epoxy?

That stuff is actually more wear resistant than the the PS 90 polymer stock.

User avatar
panzermk2
Forum Supporter
Posts: 12377
Joined: 19 Aug 2008, 15:51
Location: Pr. CEO Elite Ammunition
Contact:

Re: PS90 Owners I Need Your HELP! (JB WELD epoxy)

Post by panzermk2 » 01 Oct 2013, 09:17

Litehiker wrote:How about renewing the forward edge of the reciever lock hole with JB WELD epoxy?

That stuff is actually more wear resistant than the the PS 90 polymer stock.

Crumbles after first shot tried that years ago.

Clip like the ones used on the old style magazine lips can't be made thick enough to not break, not enough clearance between stock and receiver.

I am testing a fix by just cutting the section out and replacing it with an aluminum insert. Securing it has been the issue.
Jay Wolf
Pr. Elite Ammunition

"Engineers, the oompa-loompas of science!"

Be'ein Tachbulot Yipol Am Veteshua Berov Yoetz
Image

techspec
Junior Member
Posts: 3
Joined: 13 May 2013, 16:59

Re: PS90 Owners I Need Your HELP!

Post by techspec » 31 Mar 2014, 22:47

Was looking at my ladies PS90 and realized something. Her Duracoat in that region is holding up against the punishment that section takes pretty well. It's not even removed the finish yet. If it ever does, I'll just hit it with another coating. Seems that by cleaning the poly stock with the Duracoat degreaser, it allowed the duracoat to bond pretty well. Makes for a pretty good extra layer of protection. I was leaving my PS90 black, but maybe I'll put a coating of midnight black on mine to give it a lil extra protection too.

Jason

Litehiker
Junior Member
Posts: 85
Joined: 16 Aug 2013, 18:25

Re: PS90 Owners I Need Your HELP!

Post by Litehiker » 25 May 2015, 16:54

Would it not be much simpler (and less costly) to increase the spring rate on the magazine catch?

Buffman
Silver Member
Posts: 2990
Joined: 12 Jan 2009, 22:48
Location: SW Michigan
Contact:

Re: PS90 Owners I Need Your HELP!

Post by Buffman » 25 May 2015, 17:52

Litehiker wrote:Would it not be much simpler (and less costly) to increase the spring rate on the magazine catch?
Yes, Jay offers a tougher mag release spring.

User avatar
panzermk2
Forum Supporter
Posts: 12377
Joined: 19 Aug 2008, 15:51
Location: Pr. CEO Elite Ammunition
Contact:

Re: PS90 Owners I Need Your HELP!

Post by panzermk2 » 25 May 2015, 22:52

http://www.eliteammunition.net/p90ps90/ ... pring.html" onclick="window.open(this.href);return false;
Jay Wolf
Pr. Elite Ammunition

"Engineers, the oompa-loompas of science!"

Be'ein Tachbulot Yipol Am Veteshua Berov Yoetz
Image

rusTORK
Junior Member
Posts: 2
Joined: 07 Dec 2015, 13:48

Re: PS90 Owners I Need Your HELP!

Post by rusTORK » 07 Dec 2015, 14:10

Hello everyone.

I am new on this forum and i am looking for help.

I want to make for airsoft gas blowback version of P90 TR (made by manufacturer called WE) plastic sticker with FN marking. Your may see it on left side of body, it's saying: "Fabrique Nationale Herstal BELGIUM". Somehow WE didn't made it and airsoft version don't have markings at all. It's look fine overall, it's still P90, but this kind of small details make it more real and cool.

What i have got so far:

1. Exact marking text (Fabrique Nationale Herstal BELGIUM);
2. Size of niche on airsoft P90 TR for marking;
3. Exact font used for marking on P90\PS90;

I am looking for:

1. Scan (or high resolution photo) from top of a marking;
2. Size of niche on PS90 (just to compare airsoft P90 TR and PS90).

Scan is ideal for marking. It will give me exact coordinates of each letter and with with high resolution plus exact font i may do it clean and easy.

rusTORK
Junior Member
Posts: 2
Joined: 07 Dec 2015, 13:48

Re: PS90 Owners I Need Your HELP!

Post by rusTORK » 04 Feb 2016, 13:31

I still looking for help with my problem. Anyone?

Post Reply

Who is online

Users browsing this forum: No registered users and 8 guests