Removing the mag "safety"?
Moderator: blueorison
Re: Removing the mag "safety"?
I performed this mod to my new Five-seveN tonight. Thanks!
-
- Junior Member
- Posts: 5
- Joined: 19 Mar 2012, 12:15
Re: Removing the mag "safety"?
I also just performed this change to my FsN. I followed the guide and just moved the mag safety above the block opting not to remove it all the way.
I did notice that my magazine goes in easier, but seems to have some wobble or play at the bottom of it.. almost like it was not seated all the way.. Anyone else experience this
I did notice that my magazine goes in easier, but seems to have some wobble or play at the bottom of it.. almost like it was not seated all the way.. Anyone else experience this
Re: Removing the mag "safety"?
Just bought my new FiveseveN a couple days ago and LOVE IT! Came across this post on this forum. Performed the mod and POOF! Works like a charm! Thank you all!
Re: Removing the mag "safety"?
Scared me because I JUST made this change to my new FiveseveN! So I went back and checked it out and I'm happy to report, that mine is a snug fit with no play when the mag is installed Hope your issue gets resolved with your FN...KaosOveride wrote:I also just performed this change to my FsN. I followed the guide and just moved the mag safety above the block opting not to remove it all the way.
I did notice that my magazine goes in easier, but seems to have some wobble or play at the bottom of it.. almost like it was not seated all the way.. Anyone else experience this
-
- Junior Member
- Posts: 8
- Joined: 24 Mar 2013, 22:05
Re: Removing the mag "safety"?
Completely removed the pin from mine...anyone else done this with any problems? Buffman?
- panzermk2
- Forum Supporter
- Posts: 12380
- Joined: 19 Aug 2008, 15:51
- Location: Pr. CEO Elite Ammunition
- Contact:
Re: Removing the mag "safety"?
Jeffbethandkidz wrote:Completely removed the pin from mine...anyone else done this with any problems? Buffman?
Pin?????
Jay Wolf
Pr. Elite Ammunition
Pr. Elite Ammunition
"Engineers, the oompa-loompas of science!"
Be'ein Tachbulot Yipol Am Veteshua Berov Yoetz
-
- Junior Member
- Posts: 8
- Joined: 24 Mar 2013, 22:05
Re: Removing the mag "safety"?
I'm sorry, I ment the magazine safety bar. I completely removed mine instead of flexing it up like shown in this thread. i am wondering if anyone else has removed theirs and if they have experienced any negative side effects.
-
- Junior Member
- Posts: 4
- Joined: 03 Jun 2013, 05:35
Re: Removing the mag "safety"?
Ok so I read through this whole thread on disabling the mag safety. I thought maybe performing the mod had some value, so I pulled out my brand new never fired 5.7 that cost me $1350.00 with tax. It was more difficult to get the bar away from the plastic to move it up than anticipated, but I finally got it. I reassembled the gun and yep the mag had a little more wobble at the bottom than it did before, not a big deal. The magazine must get tension from that bar when in the factory position causing the mag to "wedge" in. I did not notice any difference in the trigger pull as others had stated. Not sure why there would be a trigger pull difference since the magazine pushes the bar up taking tension off the trigger piece. I decided to move the bar back to the factory position because it is another safety feature that may save me from a bad mistake. What I did notice from this exersize was that I had no lube on the surfaces that make contact for that component. Overall observation was that this mod really only achieves disabling the mag safety and doesn't have any other benefits for ME. :ponder: :ponder:
ps. I really hope this gun and round performs like others have said because $1350. is a LOT for this mostly plastic gun
ps. I really hope this gun and round performs like others have said because $1350. is a LOT for this mostly plastic gun
- Rapier1772
- Global Moderator
- Posts: 12939
- Joined: 20 Aug 2008, 09:00
- Location: Benton City, WA
Re: Removing the mag "safety"?
Just to clarify, you disabled the mag safety by moving it instead of actually removing it?
I am not a gunsmith but IF that is the case, then I would suggest that is why you didn't feel any difference. But that's just my uneducated opinion
I am not a gunsmith but IF that is the case, then I would suggest that is why you didn't feel any difference. But that's just my uneducated opinion
How to post pics & videos: viewtopic.php?f=3&t=6363
Contrary to popular belief, you CAN fix stupid - it's just illegal.
-
- Junior Member
- Posts: 4
- Joined: 03 Jun 2013, 05:35
Re: Removing the mag "safety"?
You are correct Rapier. I just moved the bar up like the instructions identified. Good point. if it was removed that may relieve some drag that is happening towards the front of the gun where the piece is pinned in. I just need to get out and shoot it before I get to carried away!!!
- panzermk2
- Forum Supporter
- Posts: 12380
- Joined: 19 Aug 2008, 15:51
- Location: Pr. CEO Elite Ammunition
- Contact:
Re: Removing the mag "safety"?
WarMachine wrote:Ok so I read through this whole thread on disabling the mag safety. I thought maybe performing the mod had some value, so I pulled out my brand new never fired 5.7 that cost me $1350.00 with tax. It was more difficult to get the bar away from the plastic to move it up than anticipated, but I finally got it. I reassembled the gun and yep the mag had a little more wobble at the bottom than it did before, not a big deal. The magazine must get tension from that bar when in the factory position causing the mag to "wedge" in. I did not notice any difference in the trigger pull as others had stated. Not sure why there would be a trigger pull difference since the magazine pushes the bar up taking tension off the trigger piece. I decided to move the bar back to the factory position because it is another safety feature that may save me from a bad mistake. What I did notice from this exersize was that I had no lube on the surfaces that make contact for that component. Overall observation was that this mod really only achieves disabling the mag safety and doesn't have any other benefits for ME. :ponder: :ponder:
ps. I really hope this gun and round performs like others have said because $1350. is a LOT for this mostly plastic gun
You might want to watch this video.
Elite Ammunition FsN Accurizing, Product Overview and Coffee Chat
Jay Wolf
Pr. Elite Ammunition
Pr. Elite Ammunition
"Engineers, the oompa-loompas of science!"
Be'ein Tachbulot Yipol Am Veteshua Berov Yoetz
-
- Junior Member
- Posts: 4
- Joined: 03 Jun 2013, 05:35
Re: Removing the mag "safety"?
OK that video confirmed the "mag tension" observation and he stated they are able to get a 3lbs trigger pull with the mag safety in place. What I don't get from the video is, why every gun he was handling had the mag safety disabled... http://www.fivesevenforum.com/posting.p ... =15&t=5972" onclick="window.open(this.href);return false;#
- panzermk2
- Forum Supporter
- Posts: 12380
- Joined: 19 Aug 2008, 15:51
- Location: Pr. CEO Elite Ammunition
- Contact:
Re: Removing the mag "safety"?
Because I think they are stupid. One of the number one reasons firearms fail in matches and on the street is the fact the that the magazine has not been seated all the way or the button has been bumped into. The mag may drop out but at least the gun will go bang one time instead of nothing happening will a BG kills you.WarMachine wrote:OK that video confirmed the "mag tension" observation and he stated they are able to get a 3lbs trigger pull with the mag safety in place. What I don't get from the video is, why every gun he was handling had the mag safety disabled... http://www.fivesevenforum.com/posting.p ... =15&t=5972" onclick="window.open(this.href);return false;#
Magazine disconnects like that are a European thing and are very popular over there.
Jay Wolf
Pr. Elite Ammunition
Pr. Elite Ammunition
"Engineers, the oompa-loompas of science!"
Be'ein Tachbulot Yipol Am Veteshua Berov Yoetz
- bobapunk
- Gold Member
- Posts: 691
- Joined: 20 Aug 2008, 17:10
- custom title: EA's range buddy
- Location: Peoria, IL
Re: Removing the mag "safety"?
Shooting any type of match is a royal pain in the rear end if your gun has a mag safety for 2 reasons: A- mag safeties rub on the mag and can cause the mag to NOT drop free. This creates wasted time striping the mag on reloads; and B- "If you are done, show clear. Gun is clear, hammer down and holster" is a ROYAL pain if you have to insert a mag, drop the hammer, eject mag, and then holster...
- Rapier1772
- Global Moderator
- Posts: 12939
- Joined: 20 Aug 2008, 09:00
- Location: Benton City, WA
Re: Removing the mag "safety"?
I wondered about this when I shot an IDPA match but since none of mine have one, I forgot to ask :laugh:bobapunk wrote:B- "If you are done, show clear. Gun is clear, hammer down and holster" is a ROYAL pain if you have to insert a mag, drop the hammer, eject mag, and then holster...
How to post pics & videos: viewtopic.php?f=3&t=6363
Contrary to popular belief, you CAN fix stupid - it's just illegal.
-
- Junior Member
- Posts: 4
- Joined: 03 Jun 2013, 05:35
Re: Removing the mag "safety"?
Dah! So it was you in that video panzermk2 ... And you are owner/GS at Elite Ammo?
- Rapier1772
- Global Moderator
- Posts: 12939
- Joined: 20 Aug 2008, 09:00
- Location: Benton City, WA
Re: Removing the mag "safety"?
Yup, he's the owner/vice-president.WarMachine wrote:Dah! So it was you in that video panzermk2 ... And you are owner/GS at Elite Ammo?
(His wife is actual president of EA no matter who has what title officially)
How to post pics & videos: viewtopic.php?f=3&t=6363
Contrary to popular belief, you CAN fix stupid - it's just illegal.
- bobapunk
- Gold Member
- Posts: 691
- Joined: 20 Aug 2008, 17:10
- custom title: EA's range buddy
- Location: Peoria, IL
Re: Removing the mag "safety"?
Yeah, it can be done; but, the process is cumbersome and the whole squad will look at you funny...Rapier1772 wrote:I wondered about this when I shot an IDPA match but since none of mine have one, I forgot to ask :laugh:bobapunk wrote:B- "If you are done, show clear. Gun is clear, hammer down and holster" is a ROYAL pain if you have to insert a mag, drop the hammer, eject mag, and then holster...
-
- Senior Member
- Posts: 1627
- Joined: 25 Nov 2008, 11:11
- custom title: 159.6
- Location: Somewhere in Texas
Re: Removing the mag "safety"?
Shot a match with Blue and disabled that safety after the second stage. Been that way ever since. Tried it once before but thought that it made the trigger drag a litle, but I don't notice it now.
Re: Removing the mag "safety"?
Couldn't you cut the very tip off that engages the transfer bar, there-by disabling the mag safety, but retaining the downward tension on the mag?
Re: Removing the mag "safety"?
I have a brand new 5.7 and I decided to remove the mag safety. Easy. But on the range today I discovered that I could not drop a empty mag with the slide back. The only way to reload was to release the slide, drop the empty mag, insert a new mag and finally manually cock the gun. As soon as I got home I put the spring back to the factory position. Am I the only one to experience this? Or did I do something wrong?
Bazzer
Bazzer
- Rapier1772
- Global Moderator
- Posts: 12939
- Joined: 20 Aug 2008, 09:00
- Location: Benton City, WA
Re: Removing the mag "safety"?
I'm thinking you did something wrong. My mag safety was removed during accurizing from Elite Ammunition and while it is not ejected anymore (as it was with the factory mag safety installation), it is not restrained in any way. The mag falls free due to gravity as soon as I hit the release.
Did you just move it or actually remove it? Moving it may cause binding somewhere.
Did you just move it or actually remove it? Moving it may cause binding somewhere.
How to post pics & videos: viewtopic.php?f=3&t=6363
Contrary to popular belief, you CAN fix stupid - it's just illegal.
Re: Removing the mag "safety"?
I just moved it into the position shown in the photo at the start of the thread. I'll put it there again and post a picture.Rapier1772 wrote:I'm thinking you did something wrong. My mag safety was removed during accurizing from Elite Ammunition and while it is not ejected anymore (as it was with the factory mag safety installation), it is not restrained in any way. The mag falls free due to gravity as soon as I hit the release.
Did you just move it or actually remove it? Moving it may cause binding somewhere.
Re: Removing the mag "safety"?
Some of my mags were not drop free after removing the mag safety. The mag safety puts downward pressure on the mag. I re-enabled mine, and I believe EA has changed the way they remove the mag safety now.
- panzermk2
- Forum Supporter
- Posts: 12380
- Joined: 19 Aug 2008, 15:51
- Location: Pr. CEO Elite Ammunition
- Contact:
Re: Removing the mag "safety"?
Buffman wrote:Some of my mags were not drop free after removing the mag safety. The mag safety puts downward pressure on the mag. I re-enabled mine, and I believe EA has changed the way they remove the mag safety now.
Bingo for this exact reason.
Jay Wolf
Pr. Elite Ammunition
Pr. Elite Ammunition
"Engineers, the oompa-loompas of science!"
Be'ein Tachbulot Yipol Am Veteshua Berov Yoetz
Re: Removing the mag "safety"?
panzermk2 wrote:Buffman wrote:Some of my mags were not drop free after removing the mag safety. The mag safety puts downward pressure on the mag. I re-enabled mine, and I believe EA has changed the way they remove the mag safety now.
Bingo for this exact reason.
You going to let us in on the secret? Please.
- panzermk2
- Forum Supporter
- Posts: 12380
- Joined: 19 Aug 2008, 15:51
- Location: Pr. CEO Elite Ammunition
- Contact:
Re: Removing the mag "safety"?
We retro fit that part your FsN during accurizing to that of the Tactical which did not have a magazine disconnect.
Jay Wolf
Pr. Elite Ammunition
Pr. Elite Ammunition
"Engineers, the oompa-loompas of science!"
Be'ein Tachbulot Yipol Am Veteshua Berov Yoetz
Re: Removing the mag "safety"?
I would love for you to accurize my 5.7, but I just can't afford it. But you will be hearing from me in a day or two ordering some reloading parts.panzermk2 wrote:We retro fit that part your FsN during accurizing to that of the Tactical which did not have a magazine disconnect.
Thanks
Bazzer
- panzermk2
- Forum Supporter
- Posts: 12380
- Joined: 19 Aug 2008, 15:51
- Location: Pr. CEO Elite Ammunition
- Contact:
Re: Removing the mag "safety"?
I understand, trust me, the outlay for our new in house brass has sucked up all the capital for new stuff including reloading stuff.
Jay Wolf
Pr. Elite Ammunition
Pr. Elite Ammunition
"Engineers, the oompa-loompas of science!"
Be'ein Tachbulot Yipol Am Veteshua Berov Yoetz
Re: Removing the mag "safety"?
It's a simple fix.
The flat metal spring that blocks the trigger bar also acts as the mag release spring. It's the same piece that you moved up and out of the way. It needs to remain in its original location. But, just do one of two things, either, 1) remove it and shorten it by a small amount (approx 1/4" to 5/16") so that it no longer interferes with the trigger bar, or, 2) bend the tip up by a similar amount to clear the trigger bar. With the first option, you'll need to fully remove this piece.
The flat metal spring that blocks the trigger bar also acts as the mag release spring. It's the same piece that you moved up and out of the way. It needs to remain in its original location. But, just do one of two things, either, 1) remove it and shorten it by a small amount (approx 1/4" to 5/16") so that it no longer interferes with the trigger bar, or, 2) bend the tip up by a similar amount to clear the trigger bar. With the first option, you'll need to fully remove this piece.
-
- Junior Member
- Posts: 1
- Joined: 31 Jan 2017, 23:15
Re: Removing the mag "safety"?
Using the link that someone dropped " http://www.calguns.net/calgunforum/show ... stcount=49" onclick="window.open(this.href);return false; " and some other sources i figured out as im sure everyone did that that "tension bar" holds down the trigger function to engage the magazine safety. If you take off the slide and pull the 'tension bar' upward slightly you will be able to pull the trigger. So i slowly worked the "tension bar" up until it no longer held the trigger function down to the point the magazine safety is engaged. Have absoloutely no noticable. difference no loose magazine like stated about no different trigger pulls no anything. The only thing i have noticed if at all is when the magazine is out it seems like the hammer droped the tiniest bit lighter. Barely noticable and im sure if i got back and work the metal a bit more that would go away but it shoots fine and ive noticed no effects from that.
I wouldnt recomend following the directions in the link because thats altering the workings way too much in my opinion.
I honestly wouldnt recomend doing what i did either because i have no idea the actual effects although i really do not think there are any other effects aside from disengaging that drop safety.
I wouldnt recomend following the directions in the link because thats altering the workings way too much in my opinion.
I honestly wouldnt recomend doing what i did either because i have no idea the actual effects although i really do not think there are any other effects aside from disengaging that drop safety.
- panzermk2
- Forum Supporter
- Posts: 12380
- Joined: 19 Aug 2008, 15:51
- Location: Pr. CEO Elite Ammunition
- Contact:
Re: Removing the mag "safety"?
Keep working the flat spring and your empty magazines will stop dropping out. That spring ejects them.
Jay Wolf
Pr. Elite Ammunition
Pr. Elite Ammunition
"Engineers, the oompa-loompas of science!"
Be'ein Tachbulot Yipol Am Veteshua Berov Yoetz
Re: Removing the mag "safety"?
.. :ponder:
Who is online
Users browsing this forum: No registered users and 16 guests