Reticule Enhancement Module T3 (sales)
Moderator: M1P90
- M1P90
- Forum Supporter
- Posts: 324
- Joined: 20 Aug 2008, 08:19
- Location: Socialist Republic of Mass.
- Contact:
Reticule Enhancement Module T3 (sales)
REM T3
P90/PS90 White Ring Sight Fix
The price is $39.95 shipped.
For all of you that want a usable Sight and don’t want to spend $400.00 to $600.00 to replace the White Ring Sight - THIS IS YOUR ANSWER!
The Reticule Enhancement Module T Bar 3 (REM T3) fixes the problem that is inherent in the White Ghost Ring Sight of the P90/PS90 Weapons System. We all know in certain low light conditions or when aiming at bright or light colored backgrounds, the Ring Sight looses its sight picture. When that happens just turn on the REM T3 and you will get a sharp T bar sight picture.
The REM T3 Illuminates the T bar of the Ring Sight via a colored LED that sits in the rear light collector well. The LED color only comes in RED. The LED housing is made of a hard plastic that is sized to create a tight friction fit. There is no need to use tape or glue. Just push it down into the light collector well and it stays put. The LED housing was designed to sit low in the well so it will not interfere with the FOV.
The REM T3 has 11 illumination settings so the T bar can be seen outdoors in daylight on its brightest setting (even against snow or white backgrounds) or in total darkness on its lowest setting. The REM T3 does not interfere with the Tritium illumination of the Ring Sight.
The REM T3 fits in the sling well just under the Ring Sight. It is ambidextrous so it can be mounted on the left or right side of the rifle.
The REM T3 uses one CR2032 3 volt battery (included.) The battery life is 168 to 390 hours of continuous use depending on the LED color.
The REM T3 has a 1 YEAR Warranty. I will replace it if it fails due to a manufacturing problem. (I will have to examine it first to make sure there wasn't some other factor that caused the failure). You just pay for the shipping ($5.00). If after 1 year a manufacturing problem should occur... contact me and I will see what I can do for you.
The REM T3 comes with a 30 day money back guarantee. If you are dissatisfied with it, please send it back to me and I will give you a full refund (minus shipping costs.)
The price is $39.95 shipped.
I take checks, Money Orders or I can do Pay Pal. My Pay Pal acct. is [email protected]
Go to http://www.m1bullpup.com" onclick="window.open(this.href);return false; to pay by Visa, Mastercard or Discover
PM me or e-mail me at [email protected]
Include your full name and address and LED color choice so I can put you on the order list.
REM T3
Packaging
Normal View out window
With REM T3 turned on
P90/PS90 White Ring Sight Fix
The price is $39.95 shipped.
For all of you that want a usable Sight and don’t want to spend $400.00 to $600.00 to replace the White Ring Sight - THIS IS YOUR ANSWER!
The Reticule Enhancement Module T Bar 3 (REM T3) fixes the problem that is inherent in the White Ghost Ring Sight of the P90/PS90 Weapons System. We all know in certain low light conditions or when aiming at bright or light colored backgrounds, the Ring Sight looses its sight picture. When that happens just turn on the REM T3 and you will get a sharp T bar sight picture.
The REM T3 Illuminates the T bar of the Ring Sight via a colored LED that sits in the rear light collector well. The LED color only comes in RED. The LED housing is made of a hard plastic that is sized to create a tight friction fit. There is no need to use tape or glue. Just push it down into the light collector well and it stays put. The LED housing was designed to sit low in the well so it will not interfere with the FOV.
The REM T3 has 11 illumination settings so the T bar can be seen outdoors in daylight on its brightest setting (even against snow or white backgrounds) or in total darkness on its lowest setting. The REM T3 does not interfere with the Tritium illumination of the Ring Sight.
The REM T3 fits in the sling well just under the Ring Sight. It is ambidextrous so it can be mounted on the left or right side of the rifle.
The REM T3 uses one CR2032 3 volt battery (included.) The battery life is 168 to 390 hours of continuous use depending on the LED color.
The REM T3 has a 1 YEAR Warranty. I will replace it if it fails due to a manufacturing problem. (I will have to examine it first to make sure there wasn't some other factor that caused the failure). You just pay for the shipping ($5.00). If after 1 year a manufacturing problem should occur... contact me and I will see what I can do for you.
The REM T3 comes with a 30 day money back guarantee. If you are dissatisfied with it, please send it back to me and I will give you a full refund (minus shipping costs.)
The price is $39.95 shipped.
I take checks, Money Orders or I can do Pay Pal. My Pay Pal acct. is [email protected]
Go to http://www.m1bullpup.com" onclick="window.open(this.href);return false; to pay by Visa, Mastercard or Discover
PM me or e-mail me at [email protected]
Include your full name and address and LED color choice so I can put you on the order list.
REM T3
Packaging
Normal View out window
With REM T3 turned on
- M1P90
- Forum Supporter
- Posts: 324
- Joined: 20 Aug 2008, 08:19
- Location: Socialist Republic of Mass.
- Contact:
Re: Reticule Enhancement Module T3 (sales)
NORMAL RING SIGHT VIEW IN LOW LIGHT ROOM
RED LED ON SETTING 1 IN LOW LIGHT ROOM
RED LED ON SETTING 1 IN LOW LIGHT ROOM
- M1P90
- Forum Supporter
- Posts: 324
- Joined: 20 Aug 2008, 08:19
- Location: Socialist Republic of Mass.
- Contact:
Re: Reticule Enhancement Module T3 (sales)
REM T3 Instruction Manual
Thank you for purchasing this upgrade to your PS90 Ring Sight. The REM T3 was designed to maximize your shooting pleasure by fixing the deficiencies of the Ring Sight.
Installation
1) Place side A (Rheostat Housing) on one side of the Sling Well and side B on the other side. Tighten the mounting screws until both sides are secure. Use the Allen wrench that is supplied for this procedure. (DO NOT OVER-TIGHTEN to prevent damage to the screw pins on side A.) You can use BLUE thread locker if you like but it is not necessary.
2) Look inside the well area to make sure the area is free of excess glue. If you have glue protrusions cut them out with an exacto knife/razor blade.
3) Press the LED housing ( C ) all the way down into the rear light collector well. It will be a very tight friction fit. (No need to use tape or glue)
You can now turn on and use the REM T3.
To remove the LED housing from the Ring Sight, use a flathead screwdriver to pry the housing up and out of the light collection well.
NOTE:
•Do NOT bend the LED box where the wire goes into the top, it may break it because of the stainless steel support wire.
•Do NOT pull the wiring up from the body. That may break it also.
NOTE: The REM T3 does not interfere with the Tritium Bar so in total darkness you can still rely on that as a light source if desired.
NOTE: You may notice a little light leakage out the top of the glass that is in front of the LED housing. You may place a strip of black vinyl tape over this area if you chose, to eliminate the small light leakage there. This use is optional and most users find it unnecessary.
NOTE: When using the REM T3 in total darkness, with no tactical lights in use, you may notice a slight glow on the front light collector within short distances (less than 10 feet.) This does not interfere with use of the REM T3. You can place a small piece of vinyl tape to cover the front light collector for these conditions. The use is optional and most users find it unnecessary. If you choose to use tape, place the tape on the side of the Ring Sight for easy accessibility.
Battery Replacement
Hold the “numbered part” of the Rheostat so it doesn’t turn. Turn the outside Rheostat battery cover counter clockwise to remove cover. The REM T3 uses one Lithium 3volt CR2032 battery. This package contains ONE spare battery for your convenience.
Warranty
This Product is warranted against original defects in material and/or manufacturing for one year. This warranty is void if the unit has been abused, disassembled, or modified/tampered with in any way from its original configuration.
This warranty does not apply to defects caused by normal wear and tear, improper handling, incorrect installation, accidents, and alterations/modifications to the original configuration, repairs made by unauthorized parties, aftermarket accessories, or abnormal use.
Contact Us
We hope you find the REM T3 to be a great enhancement. We invite your comments. If you have any questions, concerns or comments, please contact us at 978-852-8584 or [email protected].
INSERTING LED HOUSING
1) Insert the LED Housing into the Light Collection Well at a 45 degree angle. VINYL GASKET SIDE FIRST. Make sure the top of the Housing is lined up with the top of the glass.
2) Press down the other side of the Housing so it wedges between the Ring Sight walls.
Thank you for purchasing this upgrade to your PS90 Ring Sight. The REM T3 was designed to maximize your shooting pleasure by fixing the deficiencies of the Ring Sight.
Installation
1) Place side A (Rheostat Housing) on one side of the Sling Well and side B on the other side. Tighten the mounting screws until both sides are secure. Use the Allen wrench that is supplied for this procedure. (DO NOT OVER-TIGHTEN to prevent damage to the screw pins on side A.) You can use BLUE thread locker if you like but it is not necessary.
2) Look inside the well area to make sure the area is free of excess glue. If you have glue protrusions cut them out with an exacto knife/razor blade.
3) Press the LED housing ( C ) all the way down into the rear light collector well. It will be a very tight friction fit. (No need to use tape or glue)
You can now turn on and use the REM T3.
To remove the LED housing from the Ring Sight, use a flathead screwdriver to pry the housing up and out of the light collection well.
NOTE:
•Do NOT bend the LED box where the wire goes into the top, it may break it because of the stainless steel support wire.
•Do NOT pull the wiring up from the body. That may break it also.
NOTE: The REM T3 does not interfere with the Tritium Bar so in total darkness you can still rely on that as a light source if desired.
NOTE: You may notice a little light leakage out the top of the glass that is in front of the LED housing. You may place a strip of black vinyl tape over this area if you chose, to eliminate the small light leakage there. This use is optional and most users find it unnecessary.
NOTE: When using the REM T3 in total darkness, with no tactical lights in use, you may notice a slight glow on the front light collector within short distances (less than 10 feet.) This does not interfere with use of the REM T3. You can place a small piece of vinyl tape to cover the front light collector for these conditions. The use is optional and most users find it unnecessary. If you choose to use tape, place the tape on the side of the Ring Sight for easy accessibility.
Battery Replacement
Hold the “numbered part” of the Rheostat so it doesn’t turn. Turn the outside Rheostat battery cover counter clockwise to remove cover. The REM T3 uses one Lithium 3volt CR2032 battery. This package contains ONE spare battery for your convenience.
Warranty
This Product is warranted against original defects in material and/or manufacturing for one year. This warranty is void if the unit has been abused, disassembled, or modified/tampered with in any way from its original configuration.
This warranty does not apply to defects caused by normal wear and tear, improper handling, incorrect installation, accidents, and alterations/modifications to the original configuration, repairs made by unauthorized parties, aftermarket accessories, or abnormal use.
Contact Us
We hope you find the REM T3 to be a great enhancement. We invite your comments. If you have any questions, concerns or comments, please contact us at 978-852-8584 or [email protected].
INSERTING LED HOUSING
1) Insert the LED Housing into the Light Collection Well at a 45 degree angle. VINYL GASKET SIDE FIRST. Make sure the top of the Housing is lined up with the top of the glass.
2) Press down the other side of the Housing so it wedges between the Ring Sight walls.
- M1P90
- Forum Supporter
- Posts: 324
- Joined: 20 Aug 2008, 08:19
- Location: Socialist Republic of Mass.
- Contact:
Re: Reticule Enhancement Module T3 (sales)
Sorry about losing this thread and the previous posts. It was locked up and I couldn't make any changes so I had to restart it.
Good news. I have received enough parts from Monolith Arms to make 75 units. I just made and shipped out 15 units and have 15 more orders to fill. I also promised MagParts 20 units so that means I will have 25 left for stock. :clap:
I have some units going out to an Air Force Base for thier testing and if they adopted them they are going to order a ton. :patriot:
Good news. I have received enough parts from Monolith Arms to make 75 units. I just made and shipped out 15 units and have 15 more orders to fill. I also promised MagParts 20 units so that means I will have 25 left for stock. :clap:
I have some units going out to an Air Force Base for thier testing and if they adopted them they are going to order a ton. :patriot:
Re: Reticule Enhancement Module T3 (sales)
That would be awesome! :thumb:M1P90 wrote:
I have some units going out to an Air Force Base for thier testing and if they adopted them they are going to order a ton. :patriot:
كاف
Re: Reticule Enhancement Module T3 (sales)
Good luck,M1P90 wrote:Sorry about losing this thread and the previous posts. It was locked up and I couldn't make any changes so I had to restart it.
Good news. I have received enough parts from Monolith Arms to make 75 units. I just made and shipped out 15 units and have 15 more orders to fill. I also promised MagParts 20 units so that means I will have 25 left for stock. :clap:
I have some units going out to an Air Force Base for thier testing and if they adopted them they are going to order a ton. :patriot:
Mine works great.
- M1P90
- Forum Supporter
- Posts: 324
- Joined: 20 Aug 2008, 08:19
- Location: Socialist Republic of Mass.
- Contact:
Re: Reticule Enhancement Module T3 (sales)
12/06/08
I'm finally caught up with all backorders and I now have stock on hand of each color! :clap:
I can now ship the next day after payment is received. :thumb:
Just in time for Christmas!
I'm finally caught up with all backorders and I now have stock on hand of each color! :clap:
I can now ship the next day after payment is received. :thumb:
Just in time for Christmas!
- Cyberfly
- Global Moderator
- Posts: 10624
- Joined: 19 Aug 2008, 18:44
- custom title: Mens Room Attendant
- Location: SE OKlahoma
Re: Reticule Enhancement Module T3 (sales)
Yay!!
I know I brag on mine every chance I get, and I love showing it off to folks. I think the reticle enhancement is as much of a showpiece as the PS90 itself!
Great job, Chris!
I know I brag on mine every chance I get, and I love showing it off to folks. I think the reticle enhancement is as much of a showpiece as the PS90 itself!
Great job, Chris!
Never confuse 'The will of the Majority' with 'The will of God'.
**This post created with 100% recycled photons!**
Re: Reticule Enhancement Module T3 (sales)
I just ordered one today. I can't wait to get it!
- M1P90
- Forum Supporter
- Posts: 324
- Joined: 20 Aug 2008, 08:19
- Location: Socialist Republic of Mass.
- Contact:
Re: Reticule Enhancement Module T3 (sales)
I'm shipping yours out right now. You should probably get it Friday or Saturday. :thumb:dapenko wrote:I just ordered one today. I can't wait to get it!
Happy New Year!
I have 50 red units , 6 green units, 6 blue units and 2 amber units in stock right now. I supply Magazineparts.com with the red units and they usually order 20 at a time.
Re: Reticule Enhancement Module T3 (sales)
Chris,
My red reticle enhancement light arrived Wednesday. The biggest mistake I made, I not getting one along time ago. I can not believe how great it work. I no longer have to search for the cross hairs, they are just waiting to "jump out at me". Besides the unit being so great, the price is even greater. Thanks, from a very, very satisfied customer.
My red reticle enhancement light arrived Wednesday. The biggest mistake I made, I not getting one along time ago. I can not believe how great it work. I no longer have to search for the cross hairs, they are just waiting to "jump out at me". Besides the unit being so great, the price is even greater. Thanks, from a very, very satisfied customer.
Re: Reticule Enhancement Module T3 (sales)
I'm glad you sent two batteries. I took my PS90 out of it's case today, found the light switch on. The reticle was still lit, of course it was not as bright. I'll have to get another battery to make sure I have another on hand. I can't believe it lasted so long.
-
- Junior Member
- Posts: 23
- Joined: 27 Mar 2009, 18:18
Re: Reticule Enhancement Module T3 (sales)
Ears,
I always keep a couple of those batteries around. They are probably the most popular of the "coin" style batteries used for scopes, etc..
Wallyworld sells them in two packs.
-MontanaSheriff
I always keep a couple of those batteries around. They are probably the most popular of the "coin" style batteries used for scopes, etc..
Wallyworld sells them in two packs.
-MontanaSheriff
- Cyberfly
- Global Moderator
- Posts: 10624
- Joined: 19 Aug 2008, 18:44
- custom title: Mens Room Attendant
- Location: SE OKlahoma
Re: Reticule Enhancement Module T3 (sales)
I got the blue. I LOVE it!!
Never confuse 'The will of the Majority' with 'The will of God'.
**This post created with 100% recycled photons!**
-
- Junior Member
- Posts: 15
- Joined: 20 Sep 2009, 19:12
Re: Reticule Enhancement Module T3 (sales)
I noticed the battery life depends on the "color",
Which color has the longest battery life... Man, I'm in it for ammo and mags and now I'll be in it for this... Looks great... Saving pennies now...
panzertruppe
Which color has the longest battery life... Man, I'm in it for ammo and mags and now I'll be in it for this... Looks great... Saving pennies now...
panzertruppe
- M1P90
- Forum Supporter
- Posts: 324
- Joined: 20 Aug 2008, 08:19
- Location: Socialist Republic of Mass.
- Contact:
Re: Reticule Enhancement Module T3 (sales)
REM T3 Battery test results.
The Red color lasted 220 hours of continuous use.
The Red color lasted 220 hours of continuous use.
-
- Junior Member
- Posts: 15
- Joined: 20 Sep 2009, 19:12
Re: Reticule Enhancement Module T3 (sales)
Thnx M1P90,
I found the answer soon as I asked this question... Still scoutinig out this site... That's incredible the Blue is 2x longer + than Amber...
I was looking at your examples above... I used to sell nite sites and always got the question about which color to choose.... Well, ROYGBIV was my initial theory initroduced.... Guys would buy red and bring them back, "I can't see these things..."
Well, as you approach the infrared on red side of visible spectrum and the Ultra violet on violet side of vis spectrum, you get closer to the non-visible spectrum...
Yellow and Green rite in middle, furthest from the invisible spectrums... I like the blue though so it'll be green or blue considering batt life...
M1P90, you're doing a great job marketing this, thnx for your efforts and hope to talk to you soon.. Thanks for efforts and feedback... Honest business deserves success...
panzertruppe
I found the answer soon as I asked this question... Still scoutinig out this site... That's incredible the Blue is 2x longer + than Amber...
I was looking at your examples above... I used to sell nite sites and always got the question about which color to choose.... Well, ROYGBIV was my initial theory initroduced.... Guys would buy red and bring them back, "I can't see these things..."
Well, as you approach the infrared on red side of visible spectrum and the Ultra violet on violet side of vis spectrum, you get closer to the non-visible spectrum...
Yellow and Green rite in middle, furthest from the invisible spectrums... I like the blue though so it'll be green or blue considering batt life...
M1P90, you're doing a great job marketing this, thnx for your efforts and hope to talk to you soon.. Thanks for efforts and feedback... Honest business deserves success...
panzertruppe
- M1P90
- Forum Supporter
- Posts: 324
- Joined: 20 Aug 2008, 08:19
- Location: Socialist Republic of Mass.
- Contact:
Re: Reticule Enhancement Module T3 (sales)
:gavel: As of today 7/6/15 all future orders are Backordered about 60 days. I am having aluminum molds made so once the new REMs start coming off the line there will be a price reduction. I am shooting for around $50 each. I'll post the new price once we get closer to full production.
Stay tuned...
Chris
http://www.M1Bullpup.com" onclick="window.open(this.href);return false;
Stay tuned...
Chris
http://www.M1Bullpup.com" onclick="window.open(this.href);return false;
- M1P90
- Forum Supporter
- Posts: 324
- Joined: 20 Aug 2008, 08:19
- Location: Socialist Republic of Mass.
- Contact:
Re: Reticule Enhancement Module T3 (sales)
I have stopped taking any new orders of the REM T3s, REM T3Bs and REM T3GDs until I get the new designed REM on the market. It should take about 6 months. I will be filling all backorders within the next months as parts trickle in.
I have found a good Molding company that will mass produce these so the new price point will be around $40. It will take time to get the new molds made and get the production going.
You will love the new REMs and Packaging!
Chris
I have found a good Molding company that will mass produce these so the new price point will be around $40. It will take time to get the new molds made and get the production going.
You will love the new REMs and Packaging!
Chris
Re: Reticule Enhancement Module T3 (sales)
I may have to buy another PS90. Cant wait
- M1P90
- Forum Supporter
- Posts: 324
- Joined: 20 Aug 2008, 08:19
- Location: Socialist Republic of Mass.
- Contact:
Re: Reticule Enhancement Module T3 (sales)
It Has been a loooooooong tedious journey but I am back in business. I just receive my shipment of REM T3s and REM T3GD all packaged and ready to ship. The REM T3Bs will still be made by me and I will still attach it to your ring sight for free if you like. The new price of these are $39.95. My website is up and running so you can order them there. www.M1Bullpup.com
I also now have the REM 21 that attaches to the Mepro 21 sight. That is $29.95. I'm happy to finally be back!
I also now have the REM 21 that attaches to the Mepro 21 sight. That is $29.95. I'm happy to finally be back!
Who is online
Users browsing this forum: No registered users and 6 guests